Pioneer M-10X Operating Instructions - Page 10

SPECIFICATIONS Amplifier Section Continuous average power output of 100 watts* per channel, min., at 4 ohms, from 20 Hz to 20,000 Hz with no more than 0.2 %** total harmonic distortion. Puissance de sortie moyenne continue de 100 watts* par canal, minimum, sous 4 ohms, de 20 Hz à 20.000 Hz avec distorsion harmonique totale inférieure à 0,2 %**. Continuous power output (both channels driven at 20 Hz to 20 kHz)** T.H.D. 0.2 %, 4 100 W + 100 W T.H.D. 0.2 %, 8 70 W + 70 W Total harmonic distortion** 20 Hz to 20 kHz, 8 0.05 % Input sensitivity/ impedance 700 mV/ 50 kΩ Frequency response 5 Hz to 100 kHz +0-3dB Signal-to-Noise ratio (IHF A network, short circuit 118 dB Power Supply/ Miscellaneous Power requirements AC 120 Volts, 60 Hz Power consumption 198 W Power consumption in standby mode 1 W Consommation (en veille 1 W Dimensions 420 (W) × 319 (D) × 128 (H) mm (including knobs and other protruding parts) Weight (without package 7.6 kg Accessories Operating instructions 1 Power cord (Rated current 7 A 1 Remote control cord 1 Warranty card 1 NOTE: Specifications and design subject to possible modification without notice, due to improvements. * Measured pursuant to the Federal Trade Commission's Trade Regulation rule on Power Output Claims for Amplifiers. ** Measured by Audio Spectrum Analyzer. 10 En Publication de Pioneer Corporation. © 2000 Pioneer Corporation. Tous droits de reproduction et de traduction réservés. Published by Pioneer Corporation. Copyright © 2000 Pioneer Corporation. All rights reserved.