Pioneer M-10X Operating Instructions - Page 8

FRONT PANEL FACILITIES 2 3 v¿,?m @STEREO POWER AMPLIFIER Î STANDBY/ON POWER OFF ON STANDBY REFERENCE STEREO POWER AMPLIFIER 1 4 1 Main power ( - OFF/ _ ON ) button If the button is OFF (-), the power of the amplifier is shut off and the STANDBY/ON button on the amplifier does not function. Pressing the main power button will turn the amplifier ON (_). 2 STANDBY/ON button Press to switch the amplifier ON or into STANDBY mode. 3 STANDBY indicator Lights when the amplifier is in STANDBY mode. (Please note that this amplifier consumes a small amount of power (1 W) during the standby mode.) 4 POWER indicator Lights when the power is switched on. NOTE: The protection function will operate in case of internal amplifier malfunction or in case of external causes such as static electricity or speaker terminal short circuits. When the protection function operates, the POWER indicator flashes, and the unit goes out into standby mode. If this occurs, check the speaker terminals and speaker cords to make sure they are not shorted, then press the STANDBY/ON button to turn on the unit. If the protection function then operates again, unplug the power cord and contact a service center. 8 En