Pioneer MVH-P8300BT Owner's Manual - Page 38

Other functions, Operating this unit, Using an AUX source - stereo

Page 38 highlights

Section 03 Operating this unit # To stop auto EQ, press M.C. 9 When auto EQ is completed, Complete is displayed. When the car's interior acoustic characteristics cannot be measured correctly, an error message will be displayed. (Refer to Understanding auto EQ error messages on page 50.) 10 Store the microphone carefully in the glove compartment or another safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction. Other functions Using an AUX source When connecting auxiliary device using the front AUX input. ! You need to activate the AUX setting in the initial setting menu. Refer to AUX Input (auxiliary input) on page 34. ! If an iPod with video capabilities is connected to this unit via 3.5 mm plug (4 pole) cable (such as the CD-V150M), you can enjoy the video contents of the connected iPod. ! A portable audio/video player can be connected by using a 3.5 mm plug (4 pole) with an RCA cable (sold separately). However, depending on the cable, a reverse connection between the red (right side audio) cable and yellow (video) cable may be required in order for the sound and video image to be reproduced correctly. % Insert the mini plug into the AUX input jack on this unit. For more details, refer to Head unit on page 9. This auxiliary device is automatically set to AUX. Function settings 1 Press M.C. to display the function menu. 2 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. A/V Change (auxiliary device signal setting) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. ! Audio - auxiliary device connected with a stereo mini plug cable ! Video - auxiliary video device connected with 4-pole mini plug cable (e.g., CD-V150M) 3 Press M.C. to confirm the selection. Display (display setting) 38 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

#
To stop auto EQ, press
M.C.
9
When auto EQ is completed, Complete
is displayed.
When the car
s interior acoustic characteris-
tics cannot be measured correctly, an error
message will be displayed. (Refer to
Under-
standing auto EQ error messages
on page 50.)
10 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period, high tempera-
tures may cause distortion, color change or
malfunction.
Other functions
Using an AUX source
When connecting auxiliary device using the
front AUX input.
!
You need to activate the AUX setting in the
initial setting menu. Refer to
AUX Input
(auxiliary input)
on page 34.
!
If an iPod with video capabilities is con-
nected to this unit via 3.5 mm plug (4 pole)
cable (such as the CD-V150M), you can
enjoy the video contents of the connected
iPod.
!
A portable audio/video player can be con-
nected by using a 3.5 mm plug (4 pole) with
an RCA cable (sold separately). However,
depending on the cable, a reverse connec-
tion between the red (right side audio)
cable and yellow (video) cable may be re-
quired in order for the sound and video
image to be reproduced correctly.
%
Insert the mini plug into the AUX input
jack on this unit.
For more details, refer to
Head unit
on page 9.
This auxiliary device is automatically set to
AUX
.
Function settings
1
Press M.C. to display the function
menu.
2
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
A/V Change
(auxiliary device signal setting)
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the desired setting.
!
Audio
auxiliary device connected with a
stereo mini plug cable
!
Video
auxiliary video device connected with
4-pole mini plug cable (e.g., CD-V150M)
3
Press
M.C.
to confirm the selection.
Display
(display setting)
En
38
Section
03
Operating this unit