Pioneer MVH-P8300BT Owner's Manual - Page 8

Section 02 Before you start http://www.pioneerelectronics.ca 1 Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft. 2 Receive updates on the latest products and technologies. 3 Download owner's manuals, order product catalogues, research new products, and much more. Resetting the microprocessor The microprocessor must be reset in the following situations: ! Before using this unit for the first time after installation ! If the unit fails to operate properly ! When strange or incorrect messages ap- pear on the display Operating the demo while the ignition switch is set to ACC may drain battery power. Refer to Demonstration (demo display setting) on page 35. About this manual This manual describes operations of both MVH-P8300BT and MVH-P7300. Only MVHP8300BT features Bluetooth functions, so the explanations for those functions do not apply to MVH-P7300. In the following instructions, USB memories, USB portable audio players, and SD memory cards are collectively referred to as "external storage devices (USB, SD)". If only USB memories and USB portable audio players are indicated, they are collectively referred to as "USB storage devices". In this manual, iPod and iPhone will be referred to as "iPod". RESET button 1 Remove the front panel. 2 Press RESET with a pen tip or other pointed instrument. Demo mode Important Failure to connect the red lead (ACC) of this unit to a terminal coupled with ignition switch on/off operations may lead to battery drain. The demo automatically starts when the ignition switch is set to ACC or ON while the unit is turned off. Turning off the unit does not cancel demo mode. To cancel the demo mode, operate the function in the initial setting menu. 8 En