Pioneer PDP-4330HD Owner's Manual - Page 10
Bunch cables using provided speed clamps, Gather cables into a bunch, secure with provided bead - system cable
![]() |
View all Pioneer PDP-4330HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Preparation How to route cables Speed clamps and bead bands are included with this System for bunching cables. Once properly bunched, follow the steps below to route the cables. To the left As viewed from the rear of the display. System cable To the right Speed clamps Bead bands Speaker cable Speaker cable Speed clamps Bead bands System cable Bunch cables using provided speed clamps Attaching speed clamps to the main unit Connect the speed clamps using the 4 holes marked with • below, depending on your routing system. Attaching and removing speed clamps Insert 1 into an appropriate hole on the rear of the Plasma Display and snap 2 into the back of 1 to fix the clamp. Speed clamps are designed to be difficult to undo once in place. Please attach carefully. Use pliers to twist the clamp 90°, pulling outward. The clamp may deteriorate over time and become damaged if removed. 2 1 Gather cables into a bunch, secure with provided bead bands A • Cables can be routed to the right or left. E-7
![](/manual_guide/products/pioneer-pdp5030hd-owners-manual-8f6a85f/10.png)