Pioneer PDP-4330HD Owner's Manual - Page 8
Preparation - stand
![]() |
View all Pioneer PDP-4330HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Preparation Installing the Plasma Display Over 50 cm (19 11/16 inch) Over 10 cm (3 15/16 inch ) Locating • Avoid the direct sunlight. Keep enough ventilation. • The length of the system cable used to connect the Plasma Display and the Media Receiver is about 3 m (118 inch). • Because the Plasma Display is heavy, be sure to move it by more than two persons. L • If you place anything on top of the Media Receiver it will not receive enough ventilation and not operate properly. A • Keep enough space around the upper and back parts when installing in order to ensure ventilation around the backside. Using the optional PIONEER stand • For details on installation refer to the instruction manual provided with the stand. L • This product may be used only with model PDK-TS01 stand, use with other stands may result in instability causing possible injury. Using the optional PIONEER speakers • For details on installation refer to the instruction manual provided with the speaker. L Operating Environment Operating environment temperature and humidity: e0°C to e40°C (e32F to e104F); less than 20 % to 80% RH (cooling vents not blocked) Avoid installing in the following locations: • Under direct exposure to sunlight, • Under strong artificial light, • In high humidity, • Poorly ventilated. E-5
![](/manual_guide/products/pioneer-pdp5030hd-owners-manual-8f6a85f/8.png)