Pioneer PDP-6010FD Owner's Manual - Page 11

Safety Precautions 02 English Installation Precautions Observe the following precautions when installing with any items such as the optional bracket. When using the optional brackets or equivalent items • Ask your dealer to perform the installation. • Be sure to use the supplied bolts. • For details, see the instruction manual that comes with the optional bracket (or equivalent items). When using other items • Consult your dealer. • The following mounting holes can be used for the installation: Rear view (PDP-6010FD) Side view Mounting surface Mounting hole 4 5 Mounting hole Median line Plasma display Mounting bracket (or equivalent item) M8 screw 12 mm to 18 mm (0.5 inches to 0.7 inches) Median line Rear view (PDP-5010FD) Mounting hole 4 5 Mounting hole Median line Median line Caution • Be sure to use four or more mounting holes symmetrical to the vertical and horizontal median lines. • Use M8 screws, which go 12 mm to 18 mm (0.5 inches to 0.7 inches) in depth from the mounting surface of the plasma display. See the side view above. • Be careful not to block the ventilation opening at the rear of the plasma display. • Be sure to install the plasma display on a flat surface because it contains glass. • The screw holes other than the above are to be used only for the specified products. Never use them for mounting non-specified products. Note • It is strongly recommended to use the optional Pioneer mounting products. • Pioneer shall not be liable for any personal injury or product damage that results from the use of mounting items other than the optional Pioneer products. 11 En