Pioneer PRO-920HD Owner's Manual

Pioneer PRO-920HD Manual

Get Pioneer PRO-920HD PDF manuals and user guides View all Pioneer PRO-920HD manuals
Add to My Manuals
Save this manual to your list of manuals

Pioneer PRO-920HD manual content summary:

  • Pioneer PRO-920HD | Owner's Manual - Page 1
    PLASMA DISPLAY SYSTEM PRO-1120HD PRO-920HD Register Your Product on www.pioneerelectronics.com Operating Instructions
  • Pioneer PRO-920HD | Owner's Manual - Page 2
    exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by grounding and, in particular, specifies that the cable ground-shall be connected to the grounding system of the building, as close to
  • Pioneer PRO-920HD | Owner's Manual - Page 3
    Name: Plasma Display System (Plasma Display) (Media Receiver) Model Number: PRO-1120HD PRO-920HD (PRO-505PU) (PRO-435PU) (PRO-R05U) (PRO-R05U) Product Category: Class B Personal Computers & Peripherals Responsible Party Name: PIONEER ELECTRONICS (USA), INC., Customer Support Div. Address
  • Pioneer PRO-920HD | Owner's Manual - Page 4
    30 PC mode menus 30 Menu operations 30 09 Tuner Setup Setting up TV channels 31 Using Auto Channel Preset 31 Setting for skipping unwanted channels 31 Setting up TV channels manually 31 Naming TV channels 32 Checking signal strength 32 Checking the Cable Card ID 32 Enabling data acquisition
  • Pioneer PRO-920HD | Owner's Manual - Page 5
    manufacture codes 62 Manufacture codes 63 Using the remote control unit to control other devices 64 Receiver control buttons 64 Cable control buttons 65 SAT control buttons 66 VCR control buttons 67 DVD/DVR control buttons 68 14 Appendix Troubleshooting 69 Specifications 79 5 En
  • Pioneer PRO-920HD | Owner's Manual - Page 6
    of time, when using the still picture mode from a TV, VCR, DVD player setting for over 3 times longer than the previous still/moving image. • After using the Plasma Display System, always switch the display to "STANDBY" mode. Installation guidelines The Pioneer PureVision PRO-1120HD/PRO-920HD Plasma
  • Pioneer PRO-920HD | Owner's Manual - Page 7
    Plasma set to help prevent damage from screen burning (see page 44). About operations through i.LINK PIONEER USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER, OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURE'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE
  • Pioneer PRO-920HD | Owner's Manual - Page 8
    service life of your product, please read the following precautions carefully before using the product. 1. Read instructions-All operating instructions must be read and understood before the product is operated. 2. Keep this manual the speakers. 23. Never expose the screen of the Plasma Display to
  • Pioneer PRO-920HD | Owner's Manual - Page 9
    to use the supplied bolts. • For details, see the instruction manual that comes with the optional stand (or equivalent items). When using other items Plasma Display to or from the stand, with speakers attached. • It is strongly recommended to use the optional PIONEER mounting products. • PIONEER
  • Pioneer PRO-920HD | Owner's Manual - Page 10
    03 Operational Precautions PIONEER bears no responsibility for any damages arising from incorrect use of the product by you or other people, malfunctions when in use, other product related problems, and use of the product except in cases where the company must be liable. Plasma Display protection
  • Pioneer PRO-920HD | Owner's Manual - Page 11
    Remote control unit System cable (3 m/9.8 feet) AA size battery × 2 (Alkaline battery) Stand Screw × 4 (for stand) Screw hole cap × 4 VCR controller (1.8 m/5.9 feet) Operating Instructions Instruction guide • Always use the power cord supplied with the Plasma Display and the one supplied
  • Pioneer PRO-920HD | Owner's Manual - Page 12
    ON indicator Lights green when the Plasma Display is operating. (page 24) 4 Remote control sensor 5 STANDBY/ON button 6 INPUT button 7 VOLUME +/- buttons 8 CHANNEL +/- buttons 9 SYSTEM CABLE terminal (BLACK) 10 SYSTEM CABLE terminal (WHITE) 11 SPEAKER (right/left) terminals 12 AC INLET terminal
  • Pioneer PRO-920HD | Owner's Manual - Page 13
    VIDEO) 7 INPUT 2 terminals (AUDIO) 8 i.LINK terminals 9 Cable CARD slot 10 INPUT 1 terminals (AUDIO) 11 DIGITAL OUT terminal (OPTICAL) 12 INPUT 1 terminals (COMPONENT VIDEO: Y, CB/PB, CR/PR) 13 AC IN terminal 14 RS-232C terminal (used for factory setup) 15 ANTENNA B OUT terminal 16 INPUT 2 terminal
  • Pioneer PRO-920HD | Owner's Manual - Page 14
    set to TV 1 TV : Turns on the power to the Plasma Display or places it into standby mode. 2 Transmission confirmation LED 3 INPUT: Selects an input source of the Plasma previous menu screen. 8 / / / : Selects a desired item on the menu 5 seconds. This button is used for performing operations in dark
  • Pioneer PRO-920HD | Owner's Manual - Page 15
    For details on installation, refer to the instruction manual supplied with the stand. • This product may be used only with model PDK-1012 stand. Use with other stands may result in instability causing possible injury. Using the optional PIONEER speakers For details on installation, refer to the
  • Pioneer PRO-920HD | Owner's Manual - Page 16
    the Media Receiver vertically You can use the supplied stand to install the Media Receiver vertically. 1. Insert the stand into the side of the Media Receiver. (horizontal installation) POWER REC DATA ON STANDBY TIMER ACQUISITION System cable (approx. 3 m/9.8 feet) Right side • Do not
  • Pioneer PRO-920HD | Owner's Manual - Page 17
    the Media Receiver in the horizontal position. 4. Plug the screw holes using the supplied caps. Remove the separation sheet. Align with the hole and • When you have installed the Media Receiver vertically, be sure to use the supplied stand. If you place the unit directly on the floor, the cooling
  • Pioneer PRO-920HD | Owner's Manual - Page 18
    For details on optional PIONEER speaker installation, refer to the instruction manual that came with the speaker. System cable Connecting the system cable to the Media Receiver Media Receiver (rear view) IN OUT VCR CONTROL CONTROL IN ANTENNA B ANTENNA/ CABLE A IN Cable CARD S-VIDEO INPUT
  • Pioneer PRO-920HD | Owner's Manual - Page 19
    installed on the sides (rear view) English Speaker cable Cable binders (supplied Speed clamps with the stand)* Speaker cable * Cable binder Using the cable binders supplied with the stand, put the speaker and system cables together so that the cables are invisible from the front. At that time
  • Pioneer PRO-920HD | Owner's Manual - Page 20
    remote control sensor located at the bottom right of the front panel of the Plasma Display. The distance from the remote control sensor must be within 7 m the batteries with new ones. • Do not use manganese batteries. When you replace the batteries, use alkaline ones. • Do not mix batteries of
  • Pioneer PRO-920HD | Owner's Manual - Page 21
    A IN terminal accepts both digital and conventional TV broadcasting signals while the ANTENNA B terminal accepts only conventional TV broadcasting signals. When using a cable TV to watch digital and/or conventional TV channels, connect to the ANTENNA/CABLE A IN terminal as shown. In addition, you
  • Pioneer PRO-920HD | Owner's Manual - Page 22
    screen to a TV image. Inserting the cable card The Media Receiver is equipped with a slot for inserting a cable card. When you are watching digital and/or High Definition TV channels over cable, the card allows you to use the POD service provided by the cable TV company; the POD stands for Point of
  • Pioneer PRO-920HD | Owner's Manual - Page 23
    Plasma Display (rear view) English Power cord Media Receiver (rear view) IN OUT VCR CONTROL CONTROL IN ANTENNA B ANTENNA/ CABLE A IN Cable CARD S-VIDEO INPUT 2 INPUT 2 VIDEO R-AUDIO-L DIGITAL OUT OPTICAL (TS) S400 VIDEO INPUT 1 COMPONENT VIDEO R-AUDIO-L Y CB/PB CR/PR SERVICE
  • Pioneer PRO-920HD | Owner's Manual - Page 24
    manual, "system" means the Plasma Display Panel and Media Receiver. Turning off the power (Standby) 1 Press TV on the remote control unit or STANDBY/ON on the Plasma Plasma Display is off. Or the power cord has been disconnected from the Plasma Display. For other than the above, see "Troubleshooting
  • Pioneer PRO-920HD | Owner's Manual - Page 25
    TV stations as necessary when in emergency situations. Plasma Display (right view) CHANNEL +/- Selecting the antenna After confirming that the Mode switch on the remote control unit has been set to "TV select subchannels, also use the • (dot) subchannel 10.001 (for the cable TV), press 1, 0, • (dot
  • Pioneer PRO-920HD | Owner's Manual - Page 26
    . Pressing VOL + also quits muting. Viewing a channel banner While watching a digital TV program, pressing DTV INFO causes the following banner to appear. Pressing DTV INFO again causes the banner to disappear. Plasma Display (right view) VOLUME +/- Volume adjustment Muting 1 234 12:33pm WXCD
  • Pioneer PRO-920HD | Owner's Manual - Page 27
    have watched digital and/or High Definition TV channels over cable, you can use the POD service provided by the cable TV company. This service presents various types of useful information, using HTML text. Setting MTS/SAP mode When watching conventional TV programs, you may enjoy stereo sound and
  • Pioneer PRO-920HD | Owner's Manual - Page 28
    When receiving MONO sound signals A 125 MONO In STEREO mode A 125 MONO In SAP mode A 125 MONO In MONO mode Using the multiscreen functions Splitting the screen Use the following procedure to select the 2-screen or picture-inpicture mode. 2-screen Picture-in-picture 1 Press SPLIT to select the
  • Pioneer PRO-920HD | Owner's Manual - Page 29
    to operate picture and sound. Freezing images Use the following procedure to capture and freeze one the appropriate input source button. • If watching TV programs, press CH +/- to change the channel. press HOME MENU or DTV INFO, the single-screen mode is restored and the corresponding menu is
  • Pioneer PRO-920HD | Owner's Manual - Page 30
    08 Menu Setup Menu configuration AV mode menus Home Menu Picture Item AV Selection Contrast Brightness Color Tint Sharpness Pro Adjust Reset Setup Manual Setup Page 40 41 41 41 41 41 41 43 43 43 43 43 43 44 44 40 45 45 Menu operations The following describes the typical procedure for setting
  • Pioneer PRO-920HD | Owner's Manual - Page 31
    in step 6. • When using the Cable Converter, you may need to manually add Cable Converter output channels. Setting up TV channels manually This section describes how to manually set up TV channels that have not been set up by Auto Channel Preset. 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then
  • Pioneer PRO-920HD | Owner's Manual - Page 32
    number. Checking the Cable Card ID The Media Receiver has a slot for a cable card that is used for managing your information by the cable TV company. The following procedure allows you to check your Cable Card ID and the Host ID. 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select
  • Pioneer PRO-920HD | Owner's Manual - Page 33
    a password prevents other persons from changing Parental Control settings. A default password (1234) has been set before shipment. Use the following procedure to change the password. 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Parental Control". ( / then ENTER) 4 Select
  • Pioneer PRO-920HD | Owner's Manual - Page 34
    using buttons 0 - 9. 6 Press HOME MENU to exit the menu. Setting the voluntary movie rating system (MPAA) 1 Press HOME MENU. 2 Select "Tuner Setup". suggest you write down your password so you don't forget it. PRO-1120HD/PRO-920HD Your password No.: If you forget the password When the message
  • Pioneer PRO-920HD | Owner's Manual - Page 35
    TV ratings 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Parental Control". ( / then ENTER) 4 Select "TV Ratings". ( / then ENTER) 5 Select the desired rating and change the setting. ( / then ENTER) Parental Control TV Ratings TV Ratings TV-Y TV-Y7 TV-G TV-PG Blocked TV
  • Pioneer PRO-920HD | Owner's Manual - Page 36
    contain frequent violent scenes and extreme violence. Setting Canadian English ratings 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select " Menu Exit • The password entry screen appears. Enter your 4-digit password using buttons 0 - 9. • Each time you press ENTER, the setting
  • Pioneer PRO-920HD | Owner's Manual - Page 37
    MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Favorites". ( / then ENTER) 4 Select a color button (A, B, C, D). ( / then ENTER) 5 Select a TV TV channel under a different color button, repeat steps 4 and 5. 6 Press HOME MENU to exit the menu. Setting up closed captions Your Plasma
  • Pioneer PRO-920HD | Owner's Manual - Page 38
    HOME MENU to exit the menu. Selecting digital closed captions Use the following procedure to select digital closed captions. 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Closed Captions". ( / then ENTER) 4 Select "Digital Settings". ( / then ENTER) 5 Select "Digital Service
  • Pioneer PRO-920HD | Owner's Manual - Page 39
    parameters other than "Auto", the selected parameters are used regardless of provider's specifications. Clock Setting With "Auto Set" selected for Clock Setting, the system acquires and sets time information automatically. You can also manually set the correct time. If you disconnect the power
  • Pioneer PRO-920HD | Owner's Manual - Page 40
    elapses, the remaining time appears every minute. You can also use the menu to set the Sleep Timer. 1 Press HOME MENU. 2 Select "Sleep Timer". ( / then ENTER) 3 Select the desired time. ( / then ENTER) 4 Press HOME MENU to exit the menu. AV Selection Select from the five viewing options, depending
  • Pioneer PRO-920HD | Owner's Manual - Page 41
    pressing / . 5 Press HOME MENU to exit the menu. For AV source Item button Contrast settings for "PureCinema", "Color Temp", "MPEG NR", "DNR", "CTI", and "DRE", select "Pro Adjust" in step 3, and then press ENTER. For the subsequent procedures, see "Pro images (film specific) by automatically
  • Pioneer PRO-920HD | Owner's Manual - Page 42
    manually adjust the color temperature. Use the following procedure. 1 Select "Manual", 4 Press HOME MENU to exit the menu. MPEG NR Eliminates mosquito noise from video images when a digital TV channel is watched clearer color contours. The CTI stands for Color Transient Improvement. Selections
  • Pioneer PRO-920HD | Owner's Manual - Page 43
    Decreases audio from Decreases audio from the right speaker the left speaker 5 Press HOME MENU to exit the menu. • To restore the factory defaults for all bass using a new (factory default) technology. TruBass + SRS Provides both TruBass and SRS effects. 5 Press HOME MENU to exit the menu.
  • Pioneer PRO-920HD | Owner's Manual - Page 44
    when no signal is received for eight seconds. • When you start using the computer and a signal is received again, the system is switched on. • The system is switched on again by pressing STANDBY/ON on the Plasma Display or TV on the remote control unit. 5 Press HOME MENU to exit the menu. 44 En
  • Pioneer PRO-920HD | Owner's Manual - Page 45
    you can easily adjust the positions and clock of images using Auto Setup. Use Manual Setup to optimize the positions and clock of images when necessary. 1 Press HOME MENU. 2 Select "Option". ( / then ENTER) 3 Select "Manual Setup". ( / then ENTER) 4 Select an item to be adjusted. ( / then ENTER
  • Pioneer PRO-920HD | Owner's Manual - Page 46
    Optimized for 1024 × 768 display FULL2 For wide signal display Use when displaying 1280 × 768 signal resolution. • In 2-screen mode, press SCREEN SIZE to change the size of left screen. • The PC mode above is for the PRO-1120HD. For the PRO-920HD the number of panel pixels is different, so signal
  • Pioneer PRO-920HD | Owner's Manual - Page 47
    masks. Auto Adjusts the brightness of the gray side masks according to the brightness of images. 5 Press HOME MENU to exit the menu. Language setting You can select a language to be used for on-screen display such as menus from among three languages: English, French, and Spanish. 1 Press HOME
  • Pioneer PRO-920HD | Owner's Manual - Page 48
    11 Timer Presetting Presetting TV programs using the timer Using the menu, you can easily preset TV programs for watching later (auto channel select), recording with a D-VHS recorder, or recording via the supplied VCR controller. With the power to the system left
  • Pioneer PRO-920HD | Owner's Manual - Page 49
    set a timer to record a future digital program on a VCR, you must first turn off Parental Control. Otherwise, you will record only a black screen. See "Temporarily deactivating the Parental Control" on page 37. • To change the TV preset TV programs are overlapped, the following three rules are used
  • Pioneer PRO-920HD | Owner's Manual - Page 50
    INPUT 1 on the remote control unit or press INPUT on the Plasma Display to select INPUT1. • Refer to your DVD player instruction manual for the signal type. • The INPUT 1 terminals are checked for cable connections in the order where; 1) Component Video, 2) S-Video, 3) Video. • Connect external
  • Pioneer PRO-920HD | Owner's Manual - Page 51
    connected equipment. For the types of these signals, see the operation manual that came with the connected equipment. Before starting the menu, press INPUT 1 (or INPUT 3) on the remote control unit or press INPUT on the Plasma Display to select INPUT 1 (or INPUT 3). Input signal correlation table
  • Pioneer PRO-920HD | Owner's Manual - Page 52
    an image coming from the game console or camcorder, press INPUT 4 on the remote control unit or press INPUT on the Plasma Display to select INPUT4. Recording digital TV programs using a VCR or DVD recorder If you connect recording equipment such as a VCR or DVD recorder to the MONITOR OUT terminals
  • Pioneer PRO-920HD | Owner's Manual - Page 53
    more information, see the instruction manual that came with the AV receiver. Connecting an AV receiver Media Receiver (rear view) VCR controller (for presetting digital TV programs for recording) IN OUT VCR CONTROL CONTROL IN ANTENNA B ANTENNA/ CABLE A IN Cable CARD S-VIDEO INPUT 2 VIDEO
  • Pioneer PRO-920HD | Owner's Manual - Page 54
    using a single i.LINK cable. The i.LINK interface allows this PDP system to control one of up to two i.LINK compatible devices (in connection) that can be identified. When connecting a single D-VHS recorder Media Receiver (rear view) CR CONTROL IN ANTENNA/ CABLE A IN Cable CARD S-VIDEO
  • Pioneer PRO-920HD | Owner's Manual - Page 55
    the i.LINK cable from that D-VHS recorder. Doing so can result in image and sound interruption. • Some D-VHS recorders that support i.LINK cannot relay data when their power is off. Check the instruction manual that came with your D-VHS recorder. This system allows you to change the setting for data
  • Pioneer PRO-920HD | Owner's Manual - Page 56
    screen. After making the connections, use the menu to specify the model of the D-VHS recorder to be operated. You can operate only a single D-VHS recorder from the Plasma Display. 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Recorder Setup". ( / then ENTER) 4 Select "i.LINK
  • Pioneer PRO-920HD | Owner's Manual - Page 57
    Setting up for i.LINK standby Use the following procedure to enable data transfer between multiple i.LINK devices even when the system is in the standby mode. 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Recorder Setup supported for control, you cannot execute control. 57 En
  • Pioneer PRO-920HD | Owner's Manual - Page 58
    Setup in the menu. See page 45. To watch an image coming from the personal computer, press PC on the remote control unit or press INPUT on the Plasma Display to select "PC". • The PC terminals cannot be used for audiovisual equipment. Computer compatibility chart Resolution 720 × 400 640 × 480
  • Pioneer PRO-920HD | Owner's Manual - Page 59
    on the VCR controller cable so that it faces the VCR. VCR or DVD recorder Remote control sensor Use the following procedure to set the manufacture of the recording equipment: 1 Press HOME MENU. 2 Select "Tuner Setup". ( / then ENTER) 3 Select "Recorder Setup". ( / then ENTER) 4 Select "VCR
  • Pioneer PRO-920HD | Owner's Manual - Page 60
    Garrard Optimus Go Video Optonica GoldStar Orion Gradiente Panasonic Grundig Penney HI-Q Pentax 60 En Manufacture Philco Philips Pilot Pioneer Portland Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RCA Radio Shack Radix Randex Realistic Ricoh Runco STS Salora Samsung Sanky
  • Pioneer PRO-920HD | Owner's Manual - Page 61
    as the input switch linkage operation function and the DSP surround mode display function. For more information, see the instruction manual that came with the PIONEER AV receiver supporting SR+. • While in connection through SR+, the volume on this system is temporarily minimized. CONTROL IN OUT
  • Pioneer PRO-920HD | Owner's Manual - Page 62
    products (AV Receiver, Cable Box, SAT tuner, VCR, DVD, DVD recorder, LD) using the learning function of by the Learn mode. • The initial mode is "000" (PIONEER). Using the learning function 1 Slide the Mode switch to match the device TV , and then press and VOL + (RECEIVER section) at the same
  • Pioneer PRO-920HD | Owner's Manual - Page 63
    ) 005 JERROLD4(CABLE) 006 JERROLD5(CABLE) 007 JERROLD6(CABLE) 008 JERROLD7(CABLE) 009 JERROLD8(CABLE) 010 JERROLD9(CABLE) 011 JERROLD10(CABLE) 012 S.A.1(CABLE) 013 S.A.2(CABLE) 014 S.A.3(CABLE) 015 S.A.4(CABLE) 016 ZENITH1(CABLE) 017 ZENITH2(CABLE) 018 ZENITH3(CABLE) 019 020 PIONEER(SAT) 021 RCA1
  • Pioneer PRO-920HD | Owner's Manual - Page 64
    TV" selected) Receiver control buttons When a Pioneer receiver is connected to the display, the receiver can be operated using buttons 1 to 3. When a non-Pioneer to learn receiver's mute signal. Use this button when the mode switch is set to a position other than TV. • The color-highlighted buttons
  • Pioneer PRO-920HD | Owner's Manual - Page 65
    Remote Control Features 13 English Mode switch (with "CBL/SAT" selected) Cable control buttons When the Mode switch is set to CBL/SAT, the cable converter connected to the display can be operated using 1 to 5. Cable converters made by other manufacturers and not preset can also be operated
  • Pioneer PRO-920HD | Owner's Manual - Page 66
    the direct channel selection buttons. • Use this button to learn if necessary. 5 7 SAT MENU When this button is pressed, the satellite broadcasting menu screen will appear. 8 SAT GUIDE When this button is pressed, the satellite broadcasting guide screen will appear. • CABLE and SAT cannot be
  • Pioneer PRO-920HD | Owner's Manual - Page 67
    as follows when the Mode switch of the remote control unit is set to VCR. • When the input selector button having the same number also be operated using the remote control unit if 1 to 8 have learned the functions. See page 62. 1 CH +/- Press to select the channel of the TV tuner on the VCR
  • Pioneer PRO-920HD | Owner's Manual - Page 68
    using 1 to 12. • DVD players or DVD recorders made by other manufacturers and not preset can also be operated using Sets pauses and still pictures. 7 SAT/DVD MENU (DVD, DVD recorder) When this button is pressed, the DVD menu This operation is true of only Pioneer DVD recorders. • The DVD player
  • Pioneer PRO-920HD | Owner's Manual - Page 69
    14 English Troubleshooting Problem • No power. Possible Solution • Make sure the Plasma Display and the Media Receiver are connected correctly. (See page 18.) • Is the power cord disconnected? (See page 23.) • Has the main power been turned on? (See page 24.) • Check if you pressed TV on the
  • Pioneer PRO-920HD | Owner's Manual - Page 70
    VHS), or when your recorded program switches between different definition types, while the on-screen menu is being shown. If this happens, the menu will return to its normal size after two to three seconds. This action is normal, and does not indicate a problem with your Plasma Display system. 70 En
  • Pioneer PRO-920HD | Owner's Manual - Page 71
    , BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED out if the rouines from the library being used are not cryptographic related :-). 4. If you include any Windows specific code (or a derivative thereof) from
  • Pioneer PRO-920HD | Owner's Manual - Page 72
    Pioneer Plasma we are referring to freedom, not price. Our General Public Licenses are designed to service if you wish), that you receive source code or can get it if you want it, that you can change the software or use not the original, so that any problems introduced by others will not reflect on
  • Pioneer PRO-920HD | Owner's Manual - Page 73
    is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this
  • Pioneer PRO-920HD | Owner's Manual - Page 74
    differ in detail to address new problems or concerns. Each version is given . Our decision will be guided by the two goals of ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN use may be called something other than 'show w' and 'show c'; they could even be mouse-clicks or menu
  • Pioneer PRO-920HD | Owner's Manual - Page 75
    use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose
  • Pioneer PRO-920HD | Owner's Manual - Page 76
    of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work
  • Pioneer PRO-920HD | Owner's Manual - Page 77
    or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the
  • Pioneer PRO-920HD | Owner's Manual - Page 78
    may differ in detail to address new problems or concerns. Each version is given a this. Our decision will be guided by the two goals of preserving YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO it to be of the greatest possible use to the public, we recommend making
  • Pioneer PRO-920HD | Owner's Manual - Page 79
    (D) inches) 32.8 kg (72.3 lbs.) 43" Plasma Display, Model: PRO-435PU 1024 × 768 pixels 13 W + 13 PRO-R05U ATSC Digital TV Cable CARD 43.3 W (31 W Standby) Dimensions 420 (W) × 90 (H) × 295 (D) mm (16 9/16 (W) × 3 9/16 (H) × 1110/16 (D) inches) Weight 5.8 kg (12.8 lbs.) • Design and specifications
  • Pioneer PRO-920HD | Owner's Manual - Page 80
    Video Electronics Standards Association. • CableCARD is a trademark of Cable Television Laboratories, Inc. • The names of the companies uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Published by Pioneer Corporation. Copyright © 2004 Pioneer
  • Pioneer PRO-920HD | Owner's Manual - Page 81
    ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
PLASMA DISPLAY SYSTEM
PRO-1120HD
PRO-920HD
Operating Instructions
Register Your Product on
www.pioneerelectronics.com