Pioneer PRO-920HD Owner's Manual - Page 15
Preparation
View all Pioneer PRO-920HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Preparation Installing the Plasma Display Over 50 cm (19 /11 16 inches) Over 10 cm (3 /15 16 inches ) 06 Using the optional PIONEER stand For details on installation, refer to the instruction manual supplied with the stand. • This product may be used only with model PDK-1012 stand. Use with other stands may result in instability causing possible injury. Using the optional PIONEER speakers For details on installation, refer to the instruction manual supplied with the speaker. Operating Environment Operating environment temperature and humidity: +0°C to +40°C (+32°F to +104°F); less than 85% RH (cooling vents not blocked) Avoid installing at the following locations: • Under direct exposure to sunlight • Under strong artificial light • In high humidity • Poorly ventilated English Locating • Avoid direct sunlight. Maintain adequate ventilation. • The length of the system cable used to connect the Plasma Display and the Media Receiver is about 3 m (9.8 feet). • Because the Plasma Display is heavy, be sure to have someone help you when moving it. • If you place anything on the top of the Media Receiver it will not receive enough ventilation and will not operate properly. • Allow enough space around the upper and back parts when installing to ensure ventilation around the backside. 15 En