Pioneer PRO-920HD Owner's Manual - Page 22

06 Preparation Switching between antenna A and B To watch broadcasts via the two antennas, you can select it by pressing ANT on the remote control unit. • While watching a broadcast, press ANT to view the image received from the other antenna. • Pressing ANT while watching in the 2-screen mode (TV image and video image) with TV selected will display the TV image of the other antenna. • Pressing ANT while watching in the 2-screen mode with two TV images displayed will not have any effect. • Pressing ANT while watching in the 2-screen mode with two video images displayed will switch the selected screen to a TV image. Inserting the cable card The Media Receiver is equipped with a slot for inserting a cable card. When you are watching digital and/or High Definition TV channels over cable, the card allows you to use the POD service provided by the cable TV company; the POD stands for Point of Deployment. This service presents various types of useful information, using HTML text. 1 Confirm that the ANTENNA/CABLE A IN terminal has been connected with the coaxial cable from the Cable Converter. See page 21. 2 Hold the tab of the slot cover on the rear of the Media Receiver, and remove the cover while releasing the tab's latch. 3 Insert the specified cable card into the Cable CARD slot as far as it goes. DIGOIPTTAILCAOLUT ACNATBELNENAAI/N CCaAbRleD N P UVTI D2E O R-AUDIO-L VIDEO R-AUDIO-L (TS) VIDEO S400 R-AUDIO-L COMPCOBN/PEBNT CVIRD/EPOR Y S-VIDEO R-AUDIO-L INPUT 3 Y CB/PB CR/PR INPUT 1 H • Be sure to insert only the specified cable card. • Do not insert a PCMCIA card. Tab DIGOIPTTAILCAOLUT CCaAbRleD AUDIO-L (TS) VIDEO S400 INPUT 1 COMPCOBN/PEBNT Y CVIRD/EPOR R-AUDIO-L CR/PR INPUT 1 22 En