Pioneer SC-81 Owner's Manual - Page 78
Standby/on. - factory reset
View all Pioneer SC-81 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
09 Using other functions Resetting the system Use this procedure to reset all the receiver's settings to the factory default. Use the front panel controls to do this. Set MULTI-ZONE to MULTI ZONE OFF. ! Disconnect the iPod and USB memory device from the receiver beforehand. ! Set the Control with HDMI to OFF (see HDMI Setup on page 67 ). 1 Switch the receiver into standby. 2 While holding down ENTER on the front panel, press u STANDBY/ON. The display shows RESET c NO d. 3 Select 'RESET' using PRESET k/l, then press ENTER on the front panel. The display shows RESET? OK. 4 Press ENTER to confirm. OK appears in the display to indicate that the receiver has been reset to the factory default settings. ! Note that all settings will be saved, even if the receiver is unplugged. Default system settings Setting Digital Video Converter SPEAKERS Speaker System Front Center Speaker Setting FH/FW Surr SB SW Surround Position Crossover X-Curve DIMMER Inputs See Input function default and possible settings on page 44 . Input Volume Absorber All Inputs HDMI HDMI Audio Control Control Mode ARC (Audio Return Channel) PQLS Standby Through DSP Power On Level Volume Limit Mute Level Default OFF SB/FH ON Normal(SB/FH) SMALL SMALL SMALL SMALL SMALLx2 YES ON SIDE 80Hz OFF Brightest 0dB AMP OFF --- (OFF) --- (OFF) --- (AUTO) OFF LAST OFF FULL Setting Default Phase Control ON Auto Sound Retriever iPod/USB, INTERNET RADIO, PANDORA, MEDIA SERVER, FAVORITES, ADAPTER ON PORT input function Other input functions OFF Sound Delay 0 ms Dual Mono CH1 DRC AUTO LFE Attenuate 0dB Auto delay OFF Digital Safety OFF Effect Level ALC (Auto Level Control) 50 Center Width 3 PL II Music Options Dimension 0 Panorama OFF Neo:X Options Center Gain Neo:X CINEMA: 1.0 Neo:X MUSIC: 0.3 Neo:X GAME: 1.0 PL IIz Options Height Gain MID All Inputs Listening Mode (2 ch/multi ch) Listening Mode (Headphones) AUTO SURROUND STEREO See also Setting the Audio options on page 71 for other default DSP settings. MCACC MCACC Position Memory M1. MEMORY 1 Channel Level (M1 to M6) 0.0 dB Speaker Distance (M1 to M6) 10'00'' Standing Wave (M1 to M6) ATT of all channels/filters SWch Wide Trim 0.0 dB 0.0 dB EQ Data (M1 to M6) All channels/bands EQ Wide Trim 0.0 dB 0.0 dB Network Network Standby OFF DHCP ON 78