Pioneer SX-SW560 Owner's Manual - Page 30

09 Other connections For an external FM antenna, Use a PAL connector to hook up an external FM antenna. ANTENNA PAL connector Using this unit with a Pioneer plasma display If you have a Pioneer plasma display1, you can use an SR+ cable2 to connect it to this unit and take advantage of various convenient features, such as controlling this unit via the plasma display's remote sensor, automatic video input switching of the plasma display, display unit messages appearing on the plasma display screen, and automatic volume muting on the plasma display. • Use a 3-ringed miniplug SR+ cable to connect the CONTROL IN jack of this unit (through a media receiver, if applicable) to the CONTROL OUT jack of your plasma display.3 Before you can use the extra SR+ features, you need to make a few settings in the unit-see SR+ Setup for Pioneer plasma displays below. SR+ Setup for Pioneer plasma displays Make the following settings if you have connected a Pioneer plasma display to this unit using an SR+ cable. DVD DTV PC/GAME AUX TUNER SR SURROUND ENTER TOP MENU ADVANCED CLEAR TUNE MENU SOUND SETUP ST ENTER ST TEST TONE / TUNE RETURN MCACC / Media receiver CONTROL OUT Pioneer plasma display 1 Press SHIFT+SR+. 2 Use the SHIFT+ / (cursor left/right) buttons to choose SETUP, then press SHIFT+ENTER. 3 Use the SHIFT+ / (cursor left/right) buttons to choose the setting you want to adjust. The current setting is shown for each option as you cycle through the display. See below for a full list and description of each. MCACC CONTROL IN SETUP MIC CONTROL SPEAKERS SYSTEM CONNECTOR OUT SUB WOOFER R SURROUND L ANTENNA FM UNBAL 75Ω AM LOOP ANTENNA AUDIO INPUT DIGITAL ANALOG DVD DTV PC/GAME AUX (COAXIAL) (OPTICAL) (OPTICAL) L USE ONLY WITH DISPLAY UNIT. R SEE INSTRUCTION MANUAL. CENTER R FRONT L AC IN Important • With an SR+ cable connected, the remote must now be pointed towards your plasma display rather than the display unit of the receiver subwoofer in order to control the receiver subwoofer. 4 Use the SHIFT+ / (cursor up/down) buttons to adjust the setting. 5 Repeat steps 3 and 4 to make other settings. 6 When you're done, press SHIFT+ENTER to leave the SR+ setup menu. Automatic plasma display volume muting When Volume Control is switched on, the volume of the plasma display is automatically muted when the receiver subwoofer is switched on, or the receiver subwoofer's input function is changed to one that you would want to hear the sound from the receiver subwoofer rather than the plasma display (DVD, for example). Note 1 This system is compatible with all Pioneer plasma displays from 2003 onward. 2 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support division for more information on obtaining an SR+ cable. 3 You won't be able to use the remote sensor of this unit with the CONTROL IN jack of this unit connected to the CONTROL OUT jack of your plasma display. You can use the remote sensor of the plasma display (even in standby) as long as the power isn't switched off. 30 En