Pioneer SX-SW560 Owner's Manual - Page 36

10 Additional information Tuner Problem Remedy Considerable noise in radio broadcasts. • Connect the AM antenna (refer to the Connecting up) and adjust the direction and position for best reception. You may also connect an additional internal or external AM antenna (refer to Connecting external antennas on page 29). • Fully extend the FM wire antenna, position for best reception, and secure to a wall. You may also connect an outdoor FM antenna (see Connecting external antennas on page 29). • Turn off other equipment that may be causing the noise or move it further away. Auto tuning does not • The radio signal is weak. Auto tuning will only detect radio stations with a good signal. For more pick up some stations. sensitive tuning, connect an outdoor antenna. Error Messages Message 2CH ONLY 96K MUTING EXIT NOISY ERR MIC ERR SP EEP ERROR NO SPTYP Description • An operation is prohibited because it is only applicable to 2 channel sources, while the current source is a multichannel source. • An operation is prohibited because the source is 96 kHz digital. • An operation is prohibited because the sound is muted (press MUTE). • Appears when a menu is automatically exited after a set period of inactivity. • Background noise is too high to complete MCACC setup successfully. • An error occurred during MCACC setup because the microphone is not connected or is not connected properly. • An error occurred during MCACC setup because the speakers are not connected or are not connected properly. • Contact your Pioneer authorized service center or your dealer for servicing. • Try switching the unit off then on again. If the error still appears, please contact a Pioneer authorized service center or your dealer. 36 En