Pioneer VSX-24TX Owner's Manual - Page 30

Surround Sound Set Up 3 After selecting SETTING START with the ∞ button press ENTER. The TEST TONE will be output. These settings will be displayed on your TV. S0URCE MULTI OPERATION Î SYSTEM OFF RECEIVER DVD/LD TV/SAT VCR1 VCR2 MULTI CONTROL CD MD/ TAPE1 TUNER TVCONT CLASS ¶ MPX 7 - + TUNING 1¡ DTV ON/OFF DTV MENU BAND DIRECT ACCESS 38 - + STATION 4¢ - + CHANNEL 1 2 3 4 5 6 7 GUIDE +10 8 9 EXIT 0 ENTER DISC TV TV VOL TV CONTROL TV FUNC VOLUME EFFECT /CH SEL MENU MUTE FUNCTION SYSTEM SETUP ENTER THX /dts ADVANCED SIGNAL SELECT STANDARD REMOTE SETUP MIDNIGHT DSP STEREO DIGITAL NR DIGITAL MULTI PROCESSING AMPLIFIER REMOTE CONTROL UNIT 3,4 Channel Level Test Tone [ AUTO ] [Setting OK ] Front LL Center Front R Surround R Surround L Subwoofer [ 0dB] [ 0dB] [ 0dB] [ 0dB] [ 0dB] [ 0dB] SIGNAL SELECT ANALOG SP A AUTO STEREO VOLUME dB It takes a moment for the machine to set itself. MASTER VOLUME rotates to the reference position (0dB), and the test tone is output. To exit before outputting the TEST TONE Press ENTER To exit while outputting the TEST TONE Press ENTER. 4 Adjust speaker levels so that you hear the test tone at the same volume from each speaker when seated in your main listening position. NOTE : The volume of the sub-woofer tends to sound lower than it actually is, you may need to raise its level after testing the sound with actual soundtracks. In AUTO mode 1 Press 2 or 3 to adjust the level of the speaker outputting the TEST TONE. In MANU mode 1 Press 2 or 3 to adjust the level of the first speaker. 2 Press 5r∞ to switch the TEST TONE to the next speaker. 3 Repeat 1 and 2 for each speaker. If you are using a Sound Pressure Level (SPL) meter Take the readings from your main listening position and adjust the level of each speaker to 75 dB SPL (C-weighted/slow model). memo It is possible to set channels levels 5 independently for Surround/dts, When you have adjusted each speaker level, press STEREO, EXTERNAL DECODER and each DSP mode for listening-once purposes (see p.22 6) but if you do so these levels will remain in ENTER to return to the previous screen The MASTER VOLUME will return to its original position. Next, proceed to CROSSOVER NETWORK below. Surround/dts setup mode unless put If you want to change a setting before proceeding. back to zero. They will show up the display in step 3. Simply use the arrow buttons to go back. 6 Select EXIT with the 5r∞ buttons and press ENTER to return to the SYSTEM SETUP MENU 30