Pioneer VSX-516-S Operating Instructions - Page 42
Using the tuner, Changing the frequency step
View all Pioneer VSX-516-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
08 Using the tuner 2 Press 'T.EDIT' (VSX-516 model) / (SHIFT +) TUNER EDIT (VSX-416 model). A cursor appears at the first character position. 3 Input the name you want then press ENTER. Names can be up to four characters long. • Use the MULTI JOG dial (front panel) or the ST +/- (VSX-516 model) / STATION +/- (VSX416 model) buttons (remote) to select characters, and ENTER to confirm. If no character is input, a space is input. Tip • Once you have named a station preset, you can press (SHIFT +) TUNER DISP (VSX-516 model) / DISPLAY (VSX-416 model) when listening to a station to switch the display between the name and the frequency. Changing the frequency step If you find that you can't tune into stations successfully, the frequency step may not be suitable for your country/region. Here's how to switch the setting: 1 Switch the receiver into standby. 2 On the front panel, press STANDBY/ ON while you press and hold the TUNER EDIT button. The channel tuning step alternates between 10K STEP and 9K STEP each time you do this. Listening to station presets You will need to have some presets stored to do this. See Saving station presets on page 41 if you haven't done this already. 1 Press AM or FM to select the tuner. 2 Press (SHIFT +) CLASS (VSX-516 model) / CLASS (VSX-416 model) to select the class in which the station is stored. Press repeatedly to cycle through classes A, B and C. 3 Press ST+/- (VSX-516 model) / STATION +/- (VSX-416 model) to select the station preset you want. 42 En