Pioneer VSX-52TX Owner's Manual - Page 25

Controls and displays 04 Display 1 2 3 4 5 67 8 9 10 SIGNAL DIGITAL AUTO ANALOG SP A B SLEEP DIGITAL L C R LFE PL Neo 6 THX DTS LS S RS ADV.SURR. VIR.SB SR AUTO SURR. MONO STEREO TUNED DE DVD TV DVR VIDEO1 CD CD-R TUNER VIDEO2 MIDNIGHT LOUDNESS MULTI- ROOM ATT OVER dB 17 16 6 15 14 13 12 11 1 Speaker indicators (page 56) Lights to indicate the current speaker system, A and/or B. 2 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO Lights when AUTO signal select is on. DIGITAL Lights when a digital audio signal is detected. ANALOG Lights when an analog signal is detected. 3 Digital format indicators 2 DIGITAL Lights when a Dolby Digital encoded signal is detected. DTS Lights when a DTS encoded signal is detected. 4 Program format indicators These change according to which channels are active in Dolby, DTS, DVD-A and SACD sources. LS, S and RS will light at the same time to indicate 6.1channel sources. • L - Left front channel • C - Center channel • R - Right front channel • LS - Left surround channel • S - Surround channel (mono) or surround back channel • RS - Right surround channel • LFE - Low frequency effects channel 5 Matrix decoding format indicators 2PLII This lights to indicate Pro Logic II / Pro Logic IIx decoding (see Listening in surround sound on page 30 for more on this). Neo:6 When one of the Neo:6 modes of the receiver is on, this lights to indicate Neo:6 processing (see Listening in surround sound on page 30 for more on this). 6 Listening mode indicators THX Lights when one of the Home THX modes is selected. VIR.SB Lights during Virtual surround back processing. ADV.SURR. Lights when one of the Advanced Surround modes has been selected. AUTO SURR. Lights when the Auto Surround feature is switched on (see Auto playback on page 30). 7 MIDNIGHT / LOUDNESS When Midnight or Loudness listening is switched on, the corresponding indicator shows in the display. 8 Input source indicators Light to indicate the input source you have selected. 9 MULTI-ROOM Lights when the multi-room feature is active (page 58). 10 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. 11 OVER Lights to indicate that the level of an analog source is too high. Use the attenuator (INPUT ATT) to reduce it. 25 En