Pioneer VSX-815-K Owner's Manual - Page 29

Controls and displays 05 English Deutsch Français Italiano Nederlands Español Display 1 2 3 45 6 7 8 9 10 11 [L] 6 [C] SP AB [ R ] [R s ] [SBR] 0 [SBL ] [L s ] 6 40 125 250 4K13K 12 13 14 15 16 17 18 19 20 21 1 SIGNAL SELECT indicators Lights to indicate the type of input signal: AUTO Lights when AUTO signal select is on. SB Depending on the source, this lights when a signal with surround back channel encoding is detected. DIGITAL Lights when a digital audio signal is detected. 2 DIGITAL Lights when a Dolby Digital encoded signal is detected. ANALOG Lights when an analog signal is detected. DTS Lights when a source with DTS encoded audio signals is detected. 2 When the STANDARD mode is on, this lights to indicate decoding of a DTS multichannel signal. 3 2 DIGITAL When the STANDARD mode of the receiver is on, this lights to indicate decoding of a Dolby Digital multichannel signal. 4 2 PRO LOGIC IIx When the (STANDARD) Pro Logic II mode of the receiver is on, 2 PRO LOGIC II lights to indicate Pro Logic II decoding. 2 PRO LOGIC IIx lights to indicate Pro Logic IIx decoding (see Listening in surround sound on page 34). 5 VIR.SB Lights during Virtual surround back processing (page 40). 6 DIRECT Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source. 7 AUTO SURR. Lights when the Auto Surround feature is switched on (see Auto playback on page 34). 8 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. 9 SLEEP Lights when the sleep mode is active (page 42). 10 Tuner indicators Lights when the mono mode is set using the MPX button. Lights when a stereo FM broadcast is being received in auto stereo mode. 29 En