Pioneer VSX-820-K Owner's Manual - Page 49

Using the tuner 07 English Deutsch Français Italiano Nederlands Español 1 Tune to a station you want to memorize. See Listening to the radio on page 48 for more on this. 2 Press TUNER EDIT. The display shows PRESET, then a blinking MEM and station preset. 3 Press PRESET / to select the station preset you want. You can also use the number buttons. 4 Press ENTER. After pressing ENTER, the preset number stop blinking and the receiver stores the station. Listening to station presets You will need to have some presets stored to do this. See Saving station presets on page 48 if you haven't done this already. • Press PRESET / to select the station preset you want. • You can also use the number buttons on the remote control to recall the station preset. Naming preset stations For easier identification, you can name all of your preset stations. 1 Choose the station preset you want to name. See Listening to station presets above for how to do this. 2 Press TUNER EDIT twice. The cursor at the first character position is blinking on the display. 3 Input the name you want. Choose a name up to eight characters long. • Use the PRESET / buttons to select character position. • Use the TUNE / buttons to select characters. • The name is stored when ENTER is pressed. Tip • To erase a station name, follow steps 1 and 2, and press ENTER while the display is blank. Press TUNER EDIT while the display is blank, to keep the previous name. • Once you have named a station preset, Press DISP to show the name. When you want to return to the frequency display, press DISP several times to show the frequency. 49 En