Pioneer VSX-820-K Owner's Manual - Page 64
Pairing Bluetooth ADAPTER and Bluetooth wireless technology device
UPC - 884938109277
View all Pioneer VSX-820-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
10 Other connections 1 Switch the receiver into standby and connect Bluetooth ADAPTER to the ADAPTER PORT located in the rear panel. 2 Switch on the receiver. 3 Press ADAPTER on the remote control to switch the receiver to ADAPTER input mode.1 Pairing Bluetooth ADAPTER and Bluetooth wireless technology device "Pairing" must be done before you start playback of Bluetooth wireless technology content using Bluetooth ADAPTER. Make sure to perform pairing first time you operate the system or any time pairing data is cleared. "Pairing" is the step necessary to register Bluetooth wireless technology device to enable Bluetooth communications.2 For more details, see also the operating instructions of your Bluetooth wireless technology device. 1 Press TOP MENU. 2 Press ENTER to enter PAIRING. 3 Select the PIN code to be used from 0000/ 1234/8888 using /, then press ENTER. PAIRING blinks. Important • You can use any of 0000/1234/8888 PIN codes. Bluetooth wireless technology device using any other PIN code cannot be used with this system. 4 Switch on the Bluetooth wireless technology device that you want to make pairing, place it near the system and set it into the pairing mode. 5 Check to see that the Bluetooth ADAPTER is detected by the Bluetooth wireless technology device. When Bluetooth wireless technology device is connected: Bluetooth wireless technology device name appears in the receiver display.3 When Bluetooth wireless technology device is not connected: NODEVICE appears in the receiver display. In this case, perform the connection operation from the side of the Bluetooth wireless technology device. 6 From the Bluetooth wireless technology device list, select Bluetooth ADAPTER and enter the PIN code selected in the step 4.4 Listening to Music Contents of Bluetooth wireless technology device with Your System 1 Press ADAPTER on the remote control to switch the receiver to ADAPTER input mode. 2 Connect the Bluetooth wireless technology device to the Bluetooth ADAPTER. Note 1 When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER input mode is selected. 2 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth ADAPTER. • To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology device. 3 The system can display alphanumeric characters only. Other characters may not be displayed correctly. 4 PIN code may in some case be referred to as PASSKEY. 64 En