Pioneer VSX-9100TX Operating Instructions - Page 64
Other Settings, The Other Setup menu
View all Pioneer VSX-9100TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
11 Other Settings Assigning the component video inputs • Default settings: Component 1 - OFF Component 2 - OFF If you used component video cords to connect your video equipment you must tell the receiver which device it is, or else you may see the S-video or composite video input instead of the component video signal. For more on this, see About the video converter on page 15. 1 Select 'Component Input' from the Input Assign menu. 5. Input Assign [ a. Digital Input ] [ b. Component Input ] The Other Setup menu The Other Setup menu is where you can make customized settings to reflect how you are using the receiver. RECEIVER INPUT SELECT SOURCE DVD/LD TV/SAT DVR/VCR TVCONT MULTI CONTROL CD CD-R/TAPE TUNER RECEIVER 2 Select the number of the component video input to which you've connected your video component. Select between DVD/LD, TV/SAT, DVR, VIDEO1 or OFF. 5b. Component Input Component-1 [ DVD/LD ] Component-2 [ OFF ] • The numbers correspond with the numbers beside the inputs on the back of the receiver. 3 Select the component that corresponds with the one you connected to that input. • Use the / (cursor left/right) buttons and ENTER to do this. • Make sure you have connected the audio from the component to the corresponding inputs on the rear of the receiver. • If you connect any source component to the receiver using a component video input, you should also have your TV connected to this receiver's component video MONITOR output. 4 When you're finished, press RETURN. You will return to the Input Assign menu. INPUT ATT FL DIMMER +10 D.ACCESS TOP MENU TUNE SR DISC ENTER CLASS MENU DTVMENU ST T.EDIT ENTER ST BAND SYSTEM TUNE GUIDE SETUP TV CONTROL RETURN TV VOL INPUT SELECT TV CH VOL DTVON/OFF REC DTVINFO MUTE TUNER DISPLAY REC STOP MPX CHRETURN AUDIO SUBTITLE HDD DVD 1 Switch on the receiver and your TV. Use the RECEIVER button to switch on. 2 Press RECEIVER on the remote control, then press the SYSTEM SETUP button. An on-screen display (OSD) appears on your TV. Use the / / / buttons and ENTER on the remote control to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu. 3 Select 'Other Setup' then press ENTER. System Setup [ 1. Surr Back System ] [ 2. AUTO MCACC ] [ 3. MANUAL MCACC ] [ 4. Manual SP Setup ] [ 5. Input Assign ] [ 6. Other Setup ] Enter : Select Return : Exit 64 En