Pioneer VSX-D509S Owner's Manual - Page 7

Introductory Information Preparing the Remote Control Loading the batteries VSX-D409 VSX-D509S Dry cell batteries (AA size IEC R6P × 2) CAUTION! Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions: ¶ Never use new and old batteries together. ¶ Insert the plus and minus sides of the batteries properly according to the marks in the battery case. ¶ Batteries with the same shape may have different voltages. Do not use different batteries together. Dry cell batteries (AA size IEC LR6 × 2) Set up Operating range of remote control unit memo The remote control may not work properly if: ¶ There are obstacles between the remote control and the receiver's remote sensor. ¶ Direct sunlight or fluorescent light is shining onto the remote sensor. ¶ The receiver is located near a device that is emitting infrared rays. ¶ The receiver is operated simultaneously with another infrared remote control unit. 1 4 2 5 3 6 - + + - 30 30 23ft (7m) Operating other Pioneer components By connecting a control cord (optional), you can control other Pioneer equipment using this remote control unit. Point the remote control unit towards the remote sensor of this unit, even when operating other equipment. CONTROL OUT CONTROL IN OUT The remote control signals are received by the remote sensor of this unit, and sent to the other devices via the CONTROL OUT terminal. VSX-D409/ VSX-D509S memo You can also control Pioneer components by pointing the receiver's remote control directly at the component. This type of operation does not require control cords. Remote control unit Other Pioneer products with Î mark Connect to CONTROL IN terminal of other Pioneer products with Î mark. 7