Pioneer VSX-LX505 ELITE 9.2 Channel AV Receiver Instruction Manual English - Page 167
Multi Zone Sound Check, 3. ARC Setup, 4. Room EQ, Measuring with Dirac Live
View all Pioneer VSX-LX505 ELITE 9.2 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
4. If there is no problem with the speaker connection, select "Next" and press ENTER. To return to "Speaker Setup", select "Back to Speaker Setup" and press ENTER. 2. Multi Zone Sound Check Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in addition to the main room. 3. ARC Setup If you have connected a TV that supports ARC, select "Yes" and press ENTER. 4. Room EQ Measurements are performed to calibrate the sound field to suit the room's environment. You can choose either "Dirac Live (Advanced Users Only)" or "Full Auto MCACC" to perform the measurements. Select "Not Now" if measurement is not to be performed. Note that both measurement methods are also available after you have completed Initial Setup. When measuring with Dirac Live Select "Dirac Live (Advanced Users Only)" in the "RoomEQ" screen, then press ENTER. Download the Pioneer Remote App to your mobile device and use the app to operate the measurements. For details on how to measure with "Dirac Live", refer to "Measuring with Dirac Live" ( →p168). When measuring with Full Auto MCACC Select "Full Auto MCACC" in the "RoomEQ" screen, then press ENTER. Use the automatic sound field calibration technology built into the unit. For details on how to measure with "Full Auto MCACC", refer to "Measuring with Full Auto MCACC" ( →p170). • Both measurement methods use the supplied speaker setup microphone. • Each speaker outputs the test tone at high volume during measurement, so be careful of your surroundings. Also, keep the room as quiet as possible during measurement. • If you connect a subwoofer, check the power and volume of the subwoofer. Set the subwoofer volume to more than half. • If the power of this unit suddenly turns off, the wires in the speaker cables Setup have touched the rear panel or other wires, and the protection circuit is working. Twist the wires again securely, and make sure they do not stick out of the speaker terminals when connecting. The screen indicating that Initial Setup is complete is displayed when the measurements are finished. Press ENTER while "Finished" is being displayed to exit the Initial Setup. Measuring with Dirac Live ( →p168) Measuring with Full Auto MCACC ( →p170) 167