Pioneer XW-LF3-T Operating Instructions - Page 11

English Français Español Connect DC Power • Connect the AC adapter's USB-A connector to unit's USB-microB connector with bundled USB cable. Then connect the power plug on the other end to the power outlet. • Start to charge the internal battery automatically. (150 min for full charge) • The unit can play the music even though it is in charging status. The amount of time it takes to reach full charge will increase. Power outlet • Playing time with a fully charged battery changes depending on functions used, frequency of use, ambient temperature, speaker volume and other factors. • The furnished battery can be recharged about 500 times, although it may be less depending on conditions of use and storage. If the time required to reach a full charge increases substantially, or playing time falls dramatically even after charging, the battery pack is at the end of its life. If you wish to replace the battery pack with a new one, please contact your nearest Pioneer authorized service center. • When the AC adapter is not connected, the battery will slowly drain even when the unit is in the standby mode. If you are not going to use the unit for an extended period of time, charging it completely at least once every six months will prevent the battery from degrading. When doing this, the charge may take longer than normal. Caution • Ensure that you only use the AC adaptor and USB cable provided with the unit. Connecting an AC adaptor with different specifications to the unit may prevent the internal battery from charging correctly, or lead to malfunctions or damage. Important • Be sure to charge before using for the first time. • Approximately 150 minutes are required to fully recharge the battery. • A fully charged battery provides approximately 4 hours of use at maximum volume and approximately 7 hours at volume 10. 11 En