Pioneer XW-LF3-T Operating Instructions - Page 22

Please assist with battery recycling This product uses a lithium-ion battery. Lithium-ion batteries are a vital resource that can be recycled. When throwing the unit away, please remove the lithium-ion battery and endeavor to have it recycled. In regard to cautions for when removing the lithium-ion battery, please see "Handling the built-in lithium-ion battery". Warning • Disconnect the AC adapter before performing these procedures. • In the event that the power is turned on while performing these procedures, turn off the power and then begin the procedures again. Caution • The instructions provided here to "assist with battery recycling" are meant to allow the device's built-in rechargeable lithium-ion battery to be removed at the end of the device's service life, before final device disposal. The device's warranty is invalidated the moment the device is opened. • In order to avoid short circuits, remove the battery only after confirming that the battery's storage capacity has been fully depleted. Even when the power no longer turns on, some residual current remains in the battery. It is recommended to remove the lithium-ion battery only after leaving the device with the power turned on for several days, to assure that the battery is fully depleted. Removing the built-in battery Preparation This procedure requires the tools listed below. Be sure to assemble the necessary items before beginning. • Phillips (+) screwdriver • Flat-head (-) screwdriver 1 Remove the stand cover on the bottom of the product from the button side. Stand cover 2 Unscrew the two screws and remove the battery holder. Screw Battery holder Tips • Unscrew the screws using a Phillips (+) screwdriver. 22 En