Pioneer Z110BT Owner's Manual - Page 157

Using the external unit (EXT1, EXT2) Chapter 30 Using the external unit (EXT1, EXT2) The term "external unit" refers to future Pioneer devices that are not currently planned for, or to devices that allow control of basic functions although they are not fully controlled by the navigation system. Two external units can be controlled by this navigation system. When two external units are connected, the navigation system allocates them as external unit 1 or external unit 2. For details of the connection method, refer to "Installation Manual". For details concerning operation, refer to the external unit's operation manual. This section provides information on external unit operations with the navigation system that differ from those described in the external unit's operation manual. p Operation varies depending on the external unit connected. (In some cases, the external unit may not respond.) Reading the screen 12 34 1 Source icon Shows which source has been selected. 2 External unit indicator Displays the information that is sent by connected external units. 3 Auto/Manual mode indicator Shows the current mode. 4 Current time Using the touch panel keys % Touch [EXT1] or [EXT2] on the "AV Source" menu to select the external unit. = For details concerning operations, refer to Screen switching overview on page 34. 1 2 3 4 5 1 Send a band command Touch to send a band command to the external unit. p Operation varies depending on the external unit connected. (In some cases, the external unit may not respond.) 2 Send an [a], [b], [c], or [d] command Touch to operate the external unit. p Operation varies depending on the external unit connected. (In some cases, some functions may not be used until you touch and hold the key.) 3 Switching between automatic and manual function You can turn automatic and manual function on or off. You can switch between Auto and Manual functions of the external unit connected. Initially, this function is set to Auto. p Operating commands set for Auto and Manual operations vary depending on the external unit connected. 4 Send a 1 key to 6 key command The external unit can be operated by transmitting the operating commands set to 1 key - 6 key. p Operation varies depending on the external unit connected. (In some cases, some functions may not be used until you touch and hold the key.) 5 Use F1 - F4 to operate the external unit The external unit can be operated by transmitting the operating commands set to F1 - F4. p The operating commands set to F1 - F4 vary depending on the external unit. p Some functions may not be used until you touch and hold the key. En 157