Plantronics Voyager PRO HD User Guide - Page 5

Pairing Your Headset Before using your headset for the first time, you must pair it with your Bluetooth® enabled phone. Your new headset includes Plantronics QuickPair™ Technology to simplify the Bluetooth setup process. The first time you turn your headset on, your headset automatically enters pairing mode for 10 minutes. Once paired successfully, your headset stays on for instant use. If not successfully paired after 10 minutes, your headset automatically powers off. When you turn the headset on again, it automatically goes into pairing mode until successfully paired with a Bluetooth phone. NOTE This headset is equipped with Secure Simple Pairing (SSP). If your phone supports SSP, you will not need to enter a Passkey (PIN code). How to Pair Your Headset with Your Phone for the First Time 1 Turn on your phone's Bluetooth feature. For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phone's user guide for more information. 2 Turn the headset on (press and hold the power button until the indicator LED flashes red/blue) The headset is now in pairing mode. If you don't see the red/blue flash, press and hold the power button to turn your headset off, and then press and hold the power button again until you see the red/blue flash. 4 3 Use the commands on your phone to locate your headset. For most phones, select Settings/Tools > Devices > Bluetooth > PROPlantronics. See your phone's user guide for more information. 4 If prompted for the Passkey (PIN code), enter 0000. Pairing is successful when the indicator on your headset flashes blue. Your headset is now connected and ready to use. note To pair your headset with an additional phone, turn on the phone then repeat steps 2 through 4. Pairing Your Headset SETTINGS Time and Date Phone Settings Bluetooth 1 Sound Settings Network Services Security Reset Settings 2 BLUETOOTH Discover/ Search BLUETOOTH 3 PROPlantronics PASSKEY 4 0000 5 EN