Plantronics Voyager PRO HD User Guide - Page 7

Headset Controls and Indicators Powering on/off Check if headset is powered on Call answer/end Action Press power on/off button 2 seconds. Indicator LED On: blue glow for 2 seconds Off: red glow for 2 seconds Tap call control button Short blue flash or volume + or - button. Tap call control button. None Transfer a call from While on a call, press headset to phone or call control button for from phone to headset 1 second. None Reject call Press call control button None for 1 second during incoming call. Tone On: ascending tones Off: descending tones None Single low tone followed by low-low-high tones Single followed by double low tones Single low tone 8 DURATION: TAP is under 1 second. PRESS is 1-4 seconds as directed. Headset Controls and Indicators Action Indicator LED Tone Missed call Tap any button to clear indicator LED. Triple purple flash None every 10 seconds for 5 minutes or until cleared Mute (during a call) Press and hold volume + and - buttons simultaneously until you hear status prompt. Prompts only occur during an active call. None Mute on: sequence starts with the high-low tones plus voice prompt "Mute On" (in English). 15 minutes later just the high-low tones advise status. Full sequence repeats every 30 minutes until Mute is de-activated. Mute off: high-low tones followed by voice prompt "Mute Off" (in English). Adjust the volume Tap volume + or - (during a call) button. Single blue flash Tone at each change in volume. Double tone when min/max volume level reached. WARNING Do not use headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more information on headsets and hearing. DURATION: TAP is under 1 second. PRESS is 1-4 seconds as directed. 9 EN