Plantronics Voyager PRO HD User Guide - Page 8

Headset Controls and Indicators Redial Action Double-tap call control button. Voice-activated redial Press call control (if supported by phone) button for 1 second. Indicator LED None None Call indicator LED (enable/disable) With headset powered on, press power, volume + and - buttons simultaneously for 1 second. Turn indicator on: blue glow increases for 2 seconds. Turn indicator off: blue glow fades for 2 seconds Reconnect after leaving Tap call control button. Bluetooth range range for more than 30 seconds Single blue flash Tone Double low tone Single low tone (phone may then prompt you to say a command) Single low tone Single low tone 10 DURATION: TAP is under 1 second. PRESS is 1-4 seconds as directed. Using More Than One Bluetooth Phone Plantronics Voyager PRO supports multipoint technology, which allows you to use one headset with two different Bluetooth mobile phones. To pair your headset to a second phone, see "Pairing Your Headset" on page 4. How to Initiate a Call The headset initiates or redials a call on the phone that most recently made an outgoing call. To use the second phone, initiate the call using the controls on that phone. The second phone forms an active link with the headset. NOTE The headset cannot place a current call on hold while answering a call from the second phone. How to Answer a Call While Talking on the Other Paired Phone To answer a second call, the current call must be terminated or transferred back to the first phone. To transfer the call, see "Headset Controls" on page 8. note If you choose not to answer the second call, and you have voice mail on the second phone, the call will go to voice mail. 1 Terminate the current call. Tap the call control button. 2 Answer the second call. Tap the call control button again. TIP To avoid issues switching between calls, use the call control button on the headset rather than your phone controls. 11 EN