Poulan PRLM21i Owner Manual - Page 8

Operation

Get Poulan PRLM21i PDF manuals and user guides View all Poulan PRLM21i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

2. Move the wheel up or down for your cutting requirements. 3. Set the same height at all four corners. OPERATION WARNING: Read and understand the safety chapter before you operate the product. 2. Press the power button one time. The button illuminates fully. 1x Basic cutting technique • Always cut with a sharp blade for the best results. A blade that is not sharp cuts unevenly and lets the grass become yellow on the surface of the cut. • Do not cut more than 1/3 of the length of the grass. This specially applies during dry periods. Cut first with the cutting height set high. Then examine the result and lower to an applicable height. If the grass is too long, operate slowly and cut two times if necessary. • For very heavy cutting, decrease the width of the cut by making an overlap of the cut path and cutting slowly. • Cut in different directions each time to prevent stripes in the lawn. • Regularly hose the grass catcher with water and let dry before use. Pores in cloth grass catchers can become filled with dirt and dust with operation. The grass catcher will then collect less grass. • The side discharging mode of your product is the best cutting mode. If you try to cut a large quantity of grass and the product runs poorly or has decreased operation time, change the product to side discharging mode for better performance and operation time. Before you start the mower • Keep persons and animals away from the work area. • Do daily maintenance. See MAINTENANCE on page 9. To start the product 1. Put in the battery pack until you hear a click. Make sure the battery pack is correctly installed. 3. Pull the motor control handle in the direction of the handlebar. The power button starts to flash. 4. Press the flashing power button. The product then starts. 1x To stop the product • Release the motor control handle on the product, or press the power button one time. 1x To empty the grass catcher 1. Lift the grass catcher with the frame handle. 2. Remove grass clippings from the grass catcher from below the handle. 3. Empty grass clippings from the bag with the frame handle and the bag handle. 8 355 - 002 - 03.10.2017

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
2.
Move the wheel up or down for your cutting
requirements.
3.
Set the same height at all four corners.
OPERATION
WARNING:
Read and understand the
safety chapter before you operate the
product.
Basic cutting technique
•
Always cut with a sharp blade for the best
results. A blade that is not sharp cuts unevenly
and lets the grass become yellow on the surface
of the cut.
•
Do not cut more than 1/3 of the length of the
grass. This specially applies during dry periods.
Cut first with the cutting height set high. Then
examine the result and lower to an applicable
height. If the grass is too long, operate slowly
and cut two times if necessary.
•
For very heavy cutting, decrease the width of the
cut by making an overlap of the cut path and
cutting slowly.
•
Cut in different directions each time to prevent
stripes in the lawn.
•
Regularly hose the grass catcher with water and
let dry before use. Pores in cloth grass catchers
can become filled with dirt and dust with
operation. The grass catcher will then collect less
grass.
•
The side discharging mode of your product is the
best cutting mode. If you try to cut a large
quantity of grass and the product runs poorly or
has decreased operation time, change the
product to side discharging mode for better
performance and operation time.
Before you start the mower
•
Keep persons and animals away from the work
area.
•
Do daily maintenance. See
MAINTENANCE on
page 9
.
To start the product
1.
Put in the battery pack until you hear a click.
Make sure the battery pack is correctly installed.
2.
Press the power button one time. The button
illuminates fully.
1x
3.
Pull the motor control handle in the direction of
the handlebar. The power button starts to flash.
4.
Press the flashing power button. The product
then starts.
1x
To stop the product
•
Release the motor control handle on the product,
or press the power button one time.
1x
To empty the grass catcher
1.
Lift the grass catcher with the frame handle.
2.
Remove grass clippings from the grass catcher
from below the handle.
3.
Empty grass clippings from the bag with the
frame handle and the bag handle.
8
355 - 002 - 03.10.2017