Poulan PRST15i Owner Manual - Page 10

4. Use full throttle. 5. Make sure that the trimmer line ejects the cut material into an area that was cut before. To use the twist and edge button The twist and edge button of the product lets the operator turn the trimmer head. This makes it easier to edge along walks or driveways. To edge the grass 1. Make sure that the grass trimmer line is vertical to the ground when you edge. Walk slowly along the area to be cut. 2. Do not push the trimmer head to the ground. The ground and the product can be damaged. 3. Do not let the trimmer head touch the ground continuously because it can cause damage to the trimmer head. 1. Push and hold the button while you turn the motor housing 180 degrees. 2. Release the button to lock the motor housing in edge mode CAUTION: Always stop the product and make sure the trimmer head does not move before you change the mode of cut. MAINTENANCE WARNING: Read and understand the safety chapter before you clean, repair or do maintenance on the product. To replace the trimmer line 1. Daily maintenance • Remove the battery pack. Refer to the operating instructions of the battery pack for correct maintenance. • Examine the nuts, screws and bolts. • Examine the trigger for correct operation. • Examine the power button for correct operation. 2. • Remove external unwanted material from the product with a soft brush or dry cloth. Do not clean with water, cleaning fluids, or solvents. • Use a soft brush to remove unwanted material from the air vents. • Examine the product for missing, damaged, loose or worn parts. • Examine the product to make sure the moving parts align and are safe for operation. • If the product is damaged, speak to an approved service center. Do not use a damaged product. 10 316 - 002 - 20.11.2017