Poulan PRST15i Owner Manual - Page 9

Power meter, Battery state of charge LED

Get Poulan PRST15i PDF manuals and user guides View all Poulan PRST15i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Note: The product is set to Standard mode when started. 2. Boost mode - The product operates at high speed in Boost mode. Boost mode runs at maximum power for tasks that are not easy. To start Boost mode, push the Boost mode button until the light is on. To stop Boost mode, push the Boost mode button until the light is off. Note: If the trigger is released during operation, the product starts in the last mode. If the product automatically stops, or if the operator pushes the power button, the last used mode is erased from memory. The product is set to Standard mode again when started. Power meter The power meter shows how much power the product uses during operation. • LED lights 4 and 5 show the best performance and best battery efficiency. • LED light 6 on the right side shows maximum power and the minimum battery efficiency. Battery state of charge LED The status of the battery pack is shown until you pull the trigger. When you release the trigger, the status of the battery pack is shown again. The number of LEDs that are on show the current charge level of the battery pack. LED lights All Green LEDs come on LED 1, 2 and 3 come on LED 1 and 2 come on LED 1 comes on LED 1 flashes Battery status Fully Charged (100% - 76%) The battery pack is 75% - 51% charged. The battery pack is 50% - 26% charged. The battery pack is 25% - 6% charged. The battery pack is 5% - 0% charged. To operate the grass trimmer • Clean the cover of the trimmer head when you attach a new trimmer line to prevent vibrations. • Examine other parts of the trimmer head and clean if it is necessary. To trim the grass • Hold the trimmer head immediately above the ground at an angle. • Do not push the grass trimmer line into the grass. To cut the grass 1. Make sure that the grass trimmer line is parallel to the ground when you cut. Note: If the motor stops and the power LED stays on, push the button on the battery pack. For possible solutions, see TROUBLESHOOTING on page 11. Note: When the battery pack is fully discharged, the motor stops immediately. Note: The motor automatically stops if the battery pack or motor controller is too hot during heavy operation. Let the motor and battery pack cool. The product then resets. 2. Do not push the trimmer head to the ground. The ground and the product can be damaged. 3. Do not let the trimmer head touch the ground continuously, it can cause damage to the trimmer head. 4. Use full throttle when you move the product from side to side to cut grass. Make sure that the grass trimmer line is parallel to the ground. 316 - 002 - 20.11.2017 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
Note:
The product is set to Standard mode when
started.
2.
Boost mode
- The product operates at high speed in
Boost mode. Boost mode runs at maximum power
for tasks that are not easy. To start Boost mode,
push the Boost mode button until the light is on. To
stop Boost mode, push the Boost mode button until
the light is off.
Note:
If the trigger is released during operation, the
product starts in the last mode. If the product
automatically stops, or if the operator pushes the power
button, the last used mode is erased from memory. The
product is set to Standard mode again when started.
Power meter
The power meter shows how much power the product
uses during operation.
•
LED lights 4 and 5 show the best performance and
best battery efficiency.
•
LED light 6 on the right side shows maximum power
and the minimum battery efficiency.
Battery state of charge LED
The status of the battery pack is shown until you pull the
trigger. When you release the trigger, the status of the
battery pack is shown again.
The number of LEDs that are on show the current
charge level of the battery pack.
LED lights
Battery status
All Green LEDs
come on
Fully Charged (100% - 76%)
LED 1, 2 and 3
come on
The battery pack is 75% - 51%
charged.
LED 1 and 2
come on
The battery pack is 50% - 26%
charged.
LED 1 comes on
The battery pack is 25% - 6%
charged.
LED 1 flashes
The battery pack is 5% - 0% charg-
ed.
Note:
If the motor stops and the power LED stays on,
push the button on the battery pack. For possible
solutions, see
TROUBLESHOOTING on page 11
.
Note:
When the battery pack is fully discharged, the
motor stops immediately.
Note:
The motor automatically stops if the battery pack
or motor controller is too hot during heavy operation. Let
the motor and battery pack cool. The product then
resets.
To operate the grass trimmer
•
Clean the cover of the trimmer head when you
attach a new trimmer line to prevent vibrations.
•
Examine other parts of the trimmer head and clean if
it is necessary.
To trim the grass
•
Hold the trimmer head immediately above the
ground at an angle.
•
Do not push the grass trimmer line into the grass.
To cut the grass
1.
Make sure that the grass trimmer line is parallel to
the ground when you cut.
2.
Do not push the trimmer head to the ground. The
ground and the product can be damaged.
3.
Do not let the trimmer head touch the ground
continuously, it can cause damage to the trimmer
head.
4.
Use full throttle when you move the product from
side to side to cut grass. Make sure that the grass
trimmer line is parallel to the ground.
316 - 002 - 20.11.2017
9