Poulan PZ4822 User Manual - Page 45
EZT belt, To replace EZT E-Series Zeroturn, Transaxle belt, EZT belt removal, Belt installation
View all Poulan PZ4822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
MAINTENANCE EZT belt To replace EZT (E-Series Zeroturn Transaxle) belt Park the mower on a level surface. Engage the parking brake. EZT belt removal NOTE: Be careful not to damage the fan blades on the EZT´s as this can affect cooling or damage the EZT´s • Remove the deck belt (see to replace deck belt in this section of the manual). • Unplug clutch from wiring harness. Remove bolt from center of clutch and slide clutch off of engine shaft. • Create slack in the belt by removing the spring on the pump idler arm. • The belt should now be able to be removed from the engine pulley and EZT pulleys. Belt installation • Wrap the EZT belt around the EZT pulleys • Route the belt around the inside of the idler pulley. • Now you can wrap the belt around the engine pulley. • Reattach the spring on the pump idler arm. • Install clutch on to engine shaft (pulley side down) make sure key is installed and align the clutch anti rotation tab into slot on clutch. Secure clutch, install wire. • Reinstall the deck belt onto the electric clutch belt (see to replace deck belt in this section of the manual). Transaxle belt English-44