ProForm 10 Esp Treadmill English Manual - Page 4
Assembly
View all ProForm 10 Esp Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ASSEMBLY Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires an 8" adjustable wrench. 1. Align the lower end of the Right Handrail (22) with the indicated holes in the side of the treadmill Frame (46). Attach the Handrail with two of the four Handrail Bolts 22 (79) and Handrail Washers (36). Be careful not to pinch the wires in the Handrail. Do not tighten the 9- Bolts yet. Attach the Left Handrail (not shown) in the same manner. 46 79 36 2. Place the Console (8) on the upper ends of the Left and Right Handrails (1, 22) as shown. Pull the end of the Handrail Wire Harness (10) out of the Right Handrail and plug the it into the connector on the underside of the Console (8). The small latch on the Harness should snap onto the connector. If the Harness does not fit easily, turn it; do not force the Harness into the connector. Attach the Console with the two Console Bolts (2) and Flat Washers (39). Be careful not to damage the wires in the Handrail. Do not tighten the Bolts yet. 2 8 10 39 22 2 3. Plug the lower end of the Handrail Wire Harness (10) into the connector on the right side of the Safety Cover 3 (37). The small latch on the Harness should snap onto the connector. If the Harness does not fit easily, turn it; do not force the Harness into the connector. Firmly tighten the Bolts on the lower and upper ends of both Handrails (not shown). 37 10 4. Slide the metal Clothes Clip onto the Pulse Earclip in the indicated location. The use of the Pulse Earclip is explained in the SELECTING MONITOR MODES section on pages 9 and 10. 4 Pulse Earclip Clothes Clip 5. Remove the backing from the Wrench Clip (68), and press it onto the Right Endcap (65) in the indicated location. 5 Press the Allen Wrench (67) into the Wrench Clip. Make sure that all parts are tightened securely before using 65 00 0 the treadmill. 4 67 68