ProForm 1300 Zlt Treadmill Uk Manual - Page 8
Insert the Upright Wire 87 through the Right
View all ProForm 1300 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Attach a Wheel (96) to the Base (95) with the 3/8" x 2" Bolt (8) and the 3/8" Nut (10) that you 3 removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 89 Press a Base Cap (89) into the Base (95). 8 95 96 10 4. Identify the Right Upright (85) and the Right Upright Spacer (91), which are marked with "Right" stickers. Align the oval hole in the Right Upright Spacer with the oval hole in the Base (95). If the holes do not line up, turn the Right Upright Spacer and try again. Insert the Upright Wire (87) through the Right Upright Spacer (91) as shown. Set the Right Upright Spacer on the Base (95). Have a second person hold the Right Upright (85) near the Base (95). See the inset drawing. Tie the wire tie in the Right Upright securely around the end of the Upright Wire (87). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. 4 87 87 Wire Tie Oval Hole 85 Wire Tie 85 87 91 95 Oval Hole 8