ProForm 19.0 Re Elliptical English Manual - Page 13
Insert the Link Arm Axle into the Right Upper
View all ProForm 19.0 Re Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
8. Press the Ramp Cover (131) downward onto the Ramp (130). 8 131 130 9. Identify the Right Link Arm (43) and orient it as shown. 9 Apply grease to the axle on the Right Pedal Arm (12). Slide the Right Link Arm (43) onto the axle. Attach the Right Link Arm (43) with an M8 x 16mm Screw (102), a Small Axle Cover (56), and an M8 Washer (95). Next, apply grease to a Link Arm Axle (114). Insert the Link Arm Axle into the Right Upper Body Leg (6) and the Right Link Arm (43) from the side shown. Insert a hex key into the M8 x 16mm Screw (102) in the Link Arm Axle (114). Using a second hex key, tighten another M8 x 16mm Screw (102), a Small Axle Cover (56), and an M8 Washer (95) into the other end of the Link Arm Axle. Repeat this step on the other side of the elliptical. Grease 114 102 Grease 6 Narrow Tube 43 12 Wide Tube 95 56 102 95 56 102 13