ProForm 19.0 Re Elliptical English Manual - Page 15

12. Identify the Front Upright Cover (24) and orient it as shown. 12 Attach the Front Upright Cover (24) to the Upright (5) with four M4 x 16mm Screws (106). 24 5 106 13. Orient the Rear Upright Cover (25) as shown. 13 Connect the wire on the Receiver (144) to the Extension Wire (104). 24 Avoid pinching Tip: Avoid pinching the wires. Attach the Rear the wires 5 Upright Cover (25) around the Upright (5) by 104 pressing it into the Front Upright Cover (24). 144 25 14. Attach the iPad Holder (83) to the Console (33) with two M6 x 16mm Screws (123). 14 83 123 33 15. Make sure that all parts of the elliptical are properly tightened. Note: Extra parts may be included. To protect the floor or carpet from damage, place a mat under the elliptical. 15