ProForm 380 Razor Elliptical Uk Manual - Page 12

14. Insert the right Pedal Arm (14) into the right Upper Body Leg Bracket (21). 14 Attach the right Pedal Arm (14) to the right Upper Body Leg Bracket (21) with two M6 x 28mm Flat Head Bolts (31) and two M6 Locknuts (77). Make sure that the Locknuts are inside the hexagonal holes. Repeat this step for the left side of the elliptical exerciser. 6 31 14 21 77 Hexagonal Holes 15. See step 3. Tighten the four M10 x 20mm Patch Screws (79). Tip: Tighten the two Patch Screws on the front of the elliptical exerciser before tightening the other two Patch Screws. 16. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser. 12