ProForm 380 Razor Elliptical Uk Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver wrench , and a rubber mallet . , an adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid damaging plastic parts, do not use power tools for assembly. M6 Locknut (77)-14 M8 Locknut (82)-8 M6 Washer (35)-2 M10 Split Washer (78)-6 M4 x 16mm Round Head Screw (84)-16 M4 x 16mm Flat Head Screw (73)-4 M6 x 16mm Patch Screw (80)-2 M6 x 28mm Flat Head Bolt (31)-10 M6 x 36mm Button Bolt (76)-4 M10 x 20mm Patch Screw (79)-6 M10 x 41mm Shoulder Patch Screw (63)-2 5