ProForm 390 E Elliptical Canadian English Manual - Page 5
Assembly - parts
View all ProForm 390 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver . See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do not use power tools for assembly. M8 Jam Nut (77)-4 M8 Washer (33)-2 M10 Split Washer (78)-10 M4 x 16mm Screw (92)-7 M4 x 48mm Screw (89)-2 M8 x 20mm Patch Screw (80)-2 M8 x 45mm Button Bolt (76)-4 M10 x 20mm Patch Screw (79)-7 M10 x 48mm Patch Screw (75)-6 M10 x 85mm Patch Screw (82)-4 Shoulder Patch Bolt (31)-2 5