ProForm 480 E Treadmill English Manual - Page 12

14. Tighten six M8 x 25mm Bolts (5) with six M8 Star Washers (10) into the Uprights (85, 89) and the Handrails (99, 101). Start all six Bolts before tightening any of them. See steps 5 and 8. Tighten the four M10 x 95mm Bolts (8). Press the Left Accessory Tray (104) and Right Accessory Tray (106) into the console assembly. 14 Console Assembly 99 104 106 10 5 5 10 85 5 10 101 89 5 10 15. Raise the Frame (56) to the position shown. Have a second person hold the Frame until 15 this step is completed. 56 7 Orient the Storage Latch (60) so that the large 6 barrel and the Latch Knob (61) are in the posi- tions shown. Attach the upper end of the Storage Latch (60) to the Frame (56) with a 3/8" x 1 3/4" Bolt (7) and a 3/8" Locknut (6). 60 61 Attach the lower end of the Storage Latch (60) to the Base (95) with a 3/8" x 1 3/4" Bolt (7). Note: It may be necessary to move the Frame (56) back and forth to align the Storage Latch with the Base. Large Barrel 95 Lower the Frame (56) (see HOW TO LOWER 7 THE TREADMILL FOR USE on page 21). 16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see pages 23 and 24). 12