ProForm 480 E Treadmill English Manual - Page 9

6. Press a Base Cap (87) into the Base (95). 6 87 95 7. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the 7 Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Remove the M10 Nut (19), the M10 x 50mm Bolt (31), and the shipping bracket (A) from the Base (95). Attach a Wheel (97) with the Bolt and the Nut that you just removed. Do not overtighten the Nut; the Wheel must turn freely. Discard the shipping bracket. 31 56 95 97 A 19 8. With the help of a second person, hold a Bolt Spacer (90) inside the lower end of the Left 8 Upright (85). Insert an M10 x 95mm Bolt (8) with an M10 Star Washer (9) into the Left Upright and 8 85 the Bolt Spacer. Repeat this step with a second Bolt Spacer (90), M10 x 95mm Bolt (8), and M10 Star Washer (9). 9 Orient the Left Upright (85) and the Left Upright Spacer (86) as shown. Hold the Left Upright Spacer and the Left Upright against the Base (95). Tighten the M10 x 95mm Bolts (8) until the heads of the Bolts touch the Left Upright; do not fully tighten the Bolts yet. 90 86 95 9