ProForm 480 E Treadmill English Manual - Page 7
Screws 3 and two Base Foot Spacers 94.
 |
View all ProForm 480 E Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the tie securing the Wire Harness (88) to the 56 Base (95). Next, locate a tie in the indicated hole in the Base, and use the tie to pull the Wire Harness out of the hole. 88 Hole 95 2. Attach two Base Feet (92) to the Base (95) in the locations shown with two M4.2 x 25mm Tek 2 Screws (3) and two Base Foot Spacers (94). Attach the other two Base Feet (92) with only 95 two M4.2 x 25mm Tek Screws (3). 94 92 3 92 94 3 92 3 92 3 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
7
1.
Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Cut the tie securing the Wire Harness (88) to the
Base (95). Next, locate a tie in the indicated hole
in the Base, and use the tie to pull the Wire
Harness out of the hole.
95
56
1
88
Hole
2.
Attach two Base Feet (92) to the Base (95) in
the locations shown with two M4.2 x 25mm Tek
Screws (3) and two Base Foot Spacers (94).
Attach the other two Base Feet (92) with only
two M4.2 x 25mm Tek Screws (3).
95
3
92
2
92
3
3
92
3
92
94
94