ProForm 485 E Elliptical Uk Manual - Page 10
How To Operate The Console - description
View all ProForm 485 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
DESCRIPTION OF THE CONSOLE The console is designed to help you get the most from your workouts. As you exercise, you can watch your progress around the LED track, while the display provides continuous exercise feedback. The six modes of the display are described below. LED Track SPEED-This mode displays your current exercise speed, in miles per hour. TIME-This mode displays the length of time you have exercised. Note: If you stop exercising, the time mode will pause until you resume. DIST.-This mode displays the total distance you have completed, in miles. LAPS-This mode displays the number of 1/4-mile laps you have completed around the LED track. CAL.-This mode displays the approximate number of Calories you have burned. SCAN-This mode displays the speed, time, distance, laps, and calorie modes, for 5 seconds each, in a repeating cycle. BATTERY INSTALLATION Before the console can be operated, two 1,5V batteries must be installed. If you have not installed batteries, see assembly step 7 on page 8. HOW TO OPERATE THE CONSOLE If there is a thin sheet of clear plastic on the face of the console, remove it. 1. To turn on the power, press the "on/reset" button or simply begin exercising. When the power is turned on, one LED indicator will light in the LED track, and the entire display will appear for two seconds. The console will then be ready for operation. 2. Select one of the six modes: Scan mode- When the power is turned on, the scan mode will automatically be selected. One mode indicator Mode Indicators will show that the scan mode is selected, and a flashing mode indica- tor will show which mode is currently displayed. Note: If a different mode is selected, you can select the scan mode again by repeatedly pressing the mode button. Speed, Time, Distance, Laps, or Calorie mode-To select one of these modes for continuous display, press the mode button repeatedly. The mode indicators will show which mode is selected. (Make sure that the scan mode is not selected.) 3. The LED track represents a distance of 1/4 mile. As you exercise, the indicators around the track will light one at a time until you have completed 1/4 mile. A new lap will then begin. 4. To reset the display, press the "on/reset" button. 5. To turn off the power, simply wait for about four minutes. Note: The console has an "auto-off" feature. If the pedals are not moved and the console buttons are not pressed for four minutes, the power will turn off automatically in order to conserve the batteries. 10