ProForm 485 E Elliptical Uk Manual - Page 8
M6 x 16mm Button Head Bolts 54 and two M6 Black - elliptical
View all ProForm 485 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
6. Attach the T-Handle (10) to the Upright (3) with two 6 M6 x 16mm Button Head Bolts (54) and two M6 Black Nylon Locknuts (55). 3 7. The Console (6) requires two 1,5V batteries (not included). Alkaline batteries are recommended. 7 To install batteries, first locate the battery clip under the Console (6). Insert two batteries into the battery clip as shown. Make sure that the batteries are turned so the negative ends of the batteries (marked "-") are touching the springs in the battery clip. Battery Clip 54 10 55 6 Batteries 8. Make sure that all parts are properly tightened before you use the elliptical exerciser. Note: There may be some hardware left over after assembly is complete. Place a mat under the elliptical exerciser to protect the floor or carpet from damage. 8