ProForm 490 C Treadmill English Manual - Page 10

Slide the Left Collar 75 onto the Left Upright

Page 10 highlights

7. Press a Front Handrail Cap (106) into the Left Handrail (110). Attach the Front Handrail Cap 7 with a #8 x 3/4" Endcap Screw (16). Slide the Left Collar (75) onto the Left Upright (76). Align the large holes in the Left Collar with the large holes in the Left Upright. Set the Left Handrail (110) on the Left Collar. Attach the Left Handrail (110) with two 3/8" x 1 1/4" Bolts (7) and two 3/8" Star Washers (9). Firmly tighten the Bolts. 110 Tighten two #8 x 3/4" Screws (12) into the Left Collar (75). 75 76 106 16 9 12 7 8. Insert the Upright Wire (79) through the Right Collar (84). Slide the Right Collar onto the Right Upright (81). Hold the Right Handrail (109) near the Right Upright (81). Insert the Upright Wire (79) into the hole in the bottom of the Right Handrail and pull it out of the large hole in the side of the Right Handrail. See the inset drawing. Insert the included plastic tie through the holes in the Right Handrail (109) as shown. Look inside the Right Handrail. Make sure that the plastic tie holds the Upright Wire (79) to the side as shown in the inset drawing. Tighten the plastic tie. Press a Front Handrail Cap (106) into the Right Handrail (109). Attach the Front Handrail Cap with a #8 x 3/4" Endcap Screw (16). Attach the Right Handrail (109) with two 3/8" x 1 1/4" Bolts (7) and two 3/8" Star Washers (9). Firmly tighten the Bolts. Tighten two #8 x 3/4" Screws (12) into the Right Collar (84). 8 106 Large 16 Hole 79 Plastic Tie 79 84 109 12 81 Hole 109 Tie 79 84 Hole 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

10
8.
Insert the Upright Wire (79) through the Right
Collar (84). Slide the Right Collar onto the Right
Upright (81).
Hold the Right Handrail (109) near the Right
Upright (81). Insert the Upright Wire (79) into the
hole in the bottom of the Right Handrail and pull
it out of the large hole in the side of the Right
Handrail.
See the inset drawing.
Insert the included plas-
tic tie through the holes in the Right Handrail
(109) as shown. Look inside the Right Handrail.
Make sure that the plastic tie holds the
Upright Wire (79) to the side as shown in the
inset drawing.
Tighten the plastic tie.
Press a Front Handrail Cap (106) into the Right
Handrail (109). Attach the Front Handrail Cap
with a #8 x 3/4" Endcap Screw (16).
Attach the Right Handrail (109) with two 3/8" x 1
1/4" Bolts (7) and two 3/8" Star Washers (9).
Firmly tighten the Bolts.
Tighten two #8 x 3/4" Screws (12) into the Right
Collar (84).
8
84
81
106
79
109
12
7
9
Plastic Tie
Large
Hole
16
79
109
Tie
84
Hole
Hole
7.
Press a Front Handrail Cap (106) into the Left
Handrail (110). Attach the Front Handrail Cap
with a #8 x 3/4" Endcap Screw (16).
Slide the Left Collar (75) onto the Left Upright
(76).
Align the large holes in the Left Collar
with the large holes in the Left Upright.
Set
the Left Handrail (110) on the Left Collar.
Attach the Left Handrail (110) with two 3/8" x
1 1/4" Bolts (7) and two 3/8" Star Washers (9).
Firmly tighten the Bolts.
Tighten two #8 x 3/4" Screws (12) into the Left
Collar (75).
16
7
110
76
75
9
12
7
106