ProForm 490 C Treadmill English Manual - Page 9

5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (51) so the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Base Pad (88) to the Base (86) in the location shown with a #8 x 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (88) with only a #8 x 1" Tek Screw (2). Attach a Wheel (87) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Do not overtighten the Nut; the Wheel must turn freely. 5 A 88 2 86 B 51 4 13 88 87 2 8 6. Press a Base Cap (82) into the Base (86). 6 6 Set the Left Upright Spacer (83) on the Base (86). Hold a Bolt Spacer (80) inside the lower end of the Left Upright (76). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). Set the Left Upright in the Left Upright Spacer. 82 9 76 83 Partially tighten the 3/8" x 4" Bolts (6); do not fully tighten the Bolts yet. 80 With the help of a second person, tip the tread- 86 mill so that the Base (86) is flat on the floor. 9