ProForm 490 C Treadmill English Manual - Page 11
Be Damaged When You Turn On
View all ProForm 490 C Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9. Attach the Pulse Bar Bottom (15) to the Handrails (109, 110) with two #10 x 3/4" Screws 9 (5) and two #10 Star Washers (27). Remove the long tie from the Upright Wire (79). 110 27 5 Long Tie 5 79 15 27 109 10. With the help of a second person, hold the console assembly near the Right Handrail (109) and the Left Handrail (not shown). Connect the Upright Wire (79) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN YOU TURN ON THE POWER. Insert the connectors and the excess wire into the Right Handrail (109). 10 109 Console Wire 79 Console Assembly Console Wire 79 11. Connect the console ground wire to the handrail ground wire. Set the console assembly on the Handrails (109, 110). Make sure that the wires are not pinched. Attach the console assembly with ten #8 x 3/4" Screws (12). Start all the Screws before tightening any of them. Cut the plastic tie off the Right Handrail (109). See steps 4 and 6. Firmly tighten the 3/8" x 4" Bolts (6). 11 Console Assembly 110 Ground Wires 12 Plastic 12 Tie 12 12 12 12 109 12 11