ProForm 505 Zle Instruction Manual - Page 10
Tip: To prevent the Pulse Wires 63
![]() |
View all ProForm 505 Zle manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10. Attach the Right Pedal Arm (58) to the Right Pedal Bracket (64) with two M10 x 45mm Patch 10 Screws (99). Repeat this step for the Left Pedal Arm (44). 44 64 58 99 11. Identify the Right Handlebar (9), which is marked with a "Right" sticker. See the inset drawing. Locate the wire tie in the Upright (4). Tie the lower end of the wire tie to the Pulse Wire (63) in the Right Handlebar (9). Next, pull the upper end of the wire tie until the Pulse Wire is routed through the Upright. Then, slide the Right Handlebar (9) onto the right side of the Upright (4). Tip: Avoid pinching the wires. Attach the Right Handlebar (9) with two M8 x 16mm Patch Screws (110) and two M8 Split Washers (83). Repeat this step for the Left Handlebar (8). Tip: To prevent the Pulse Wires (63) from falling into the Upright (4), secure the Pulse Wires with the wire ties. 11 63 8 4 Wire Tie 63 Avoid pinching the wires Wire Tie 63 9 83 110 10
![](/manual_guide/products/proform-pfevel96010-instruction-manual-805bdf0/10.png)