ProForm 505 Zle Instruction Manual - Page 20
Maintenance And Troubleshooting
View all ProForm 505 Zle manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical regularly. Replace any worn parts immediately. To clean the elliptical, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight. Locate and loosen the Idler Bolt (120). Next, tighten the Belt Adjustment Screw (88) until the Drive Belt (not shown) is tight. Then, retighten the Idler Bolt. CONSOLE TROUBLESHOOTING If the console does not display your heart rate when you hold the handgrip pulse sensor, or if the displayed heart rate appears to be too high or too low, see step 5 on page 17. If the console does not display your heart rate when you use the chest pulse sensor, see TROUBLESHOOTING on page 12. HOW TO ADJUST THE DRIVE BELT 120 88 If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest level, the drive belt may need to be adjusted. Reattach the right disc by rotating it clockwise into the right disc mount. To adjust the drive belt, first 71 use a flat screwdriver to rotate the right Disc (71) coun- terclockwise. Then, remove 72 the right Disc from the right Disc Mount (72). 20