ProForm 505 Zle Instruction Manual - Page 11

12. Attach the Water Bottle Holder (37) to the 12 Upright (4) with two M4 x 16mm Screws (104). 4 104 37 104 13. Untie and discard the wire ties on the Wire Harness (111) and the Pulse Wires (63). 13 While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Wire Harness (111) and to the Pulse Wires (63). Insert the excess wire downward into the Upright (4). Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 16mm Screws (104). See step 3. Tighten the M8 x 19mm Patch Screws (82). 14. Plug the Power Adapter (112) into the recepta- 14 cle on the front of the elliptical. If necessary, plug the Power Adapter (112) into the Plug Adapter (122). To plug the Power Adapter (112) into an outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 13. 7 Avoid pinching the wires 111 4 63 104 122 112 15. Make sure that all parts are properly tightened before you use the elliptical. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the elliptical to protect the floor. 11